Fwa7304 series network appliance user′s manual version: 1.0
Fwa7304 series user’s manual 1 table of contents chapter 1 introduction ................................................................................................................... 3 chapter 2 system specification ..................................................................................
Fwa7304 series user’s manual 2 foreword to prevent damage to the system board, please handle it with care and follow the measures below, which are generally sufficient to protect your equipment from static electricity discharge: when handling the board, use a grounded wrist strap designed for static...
Fwa7304 series user’s manual 3 chapter 1 introduction the fwa7304 series was specifically designed for the network security & management market. Network security applications: • firewall • virtual private network • proxy server • caching server network management applications: • load balancing • qua...
Fwa7304 series user’s manual 4 chapter 2 system specification processor via eden v4 cpu, 1ghz l2 cache: 128k memory ddr2 so-dimm x 1 chipset via cn700 north bridge expansion slots 32bit/33mhz mini-pci slot x 1 ethernet realtek rtl8100c fast ethernet controllers x 4 , 10/100 base-t front i/o usb 2.0 ...
Fwa7304 series user’s manual 5 chapter 3 hardware configuration cpu board layout jumper setting jbat1: clear cmos contents use jbat1, a 3-pin header, to clear the cmos contents jbat1 setting function pin 1-2 short/closed normal pin 2-3 short/closed clear cmos jp3: hdd udma selection jp4 setting func...
Fwa7304 series user’s manual 6 chapter 4 console mode information fwa7304 supports output information via console in bios level. Prepare a computer as client loaded with an existing os such windows xp. Connect client computer and fwa7304 with null modem cable. Follow the steps below to configure the...
Fwa7304 series user’s manual 7 5. Power up the fwa7304, and the screen will display the following information. 6. Press tab > key to enter bios setup screen in console mode . Press del > key to enter bios setup screen in vga mode ..
Fwa7304 series user’s manual 8 chapter 5 open the chassis 1. Fig. 5-1 loosen the four screws of the chassis on the back to remove the top lead. Fig. 5-2 the top lead (fig. 5-2) can be removed from the base stand (fig. 5-3). 2. Fig. 5-3 the base stand 格式化: 項目符號及編號 格式化: 項目符號及編號.
Fwa7304 series user’s manual 9 chapter 6 removing and installing compactflash card 1. Fig. 6-1 compact flash card fig. 6-2 insert compact flash card into the cf interface 格式化: 項目符號及編號.
Fwa7304 series user’s manual 10 chapter 7 installing mini-pci card fig. 7-1 mini-pci card. Fig. 7-2 install the mini-pci card..
Fwa7304 series user’s manual 11 chapter 8 install 2.5” hdd fig. 8-1 fasten the four screws to lock hdd and bracket together. Fig. 8-2 fasten the four stands-off to lock ib798. Blue portion for long stands-off. Red portion for short stands-off. Fig. 8-3 connect ide cable between 3.5” hdd and ib798. F...
Fwa7304 series user’s manual 12 chapter 9 system architecture the following block diagram illustrates a basic design reference of ib798, a highly integrated system solution..