Te-wtr user manual ibeamusa.Com metradealer.Com techsupport@metra-autosound.Com tech support l ::: j 800-253-8324.
1 components.
2 functions 1) after connecting the main power, the blue color power led will be activated at both rx and tx. Immediately after connecting the main power, the green color link led will be activated at both rx and tx. When rx-tx's blue color power led and green color link led are activated at the sam...
3 transmitter (tx) the tx should be installed on top of the roof from the cargo space or under the bottom of the cargo space. Receiver (rx) and transmitter (tx) the modules should be installed as high as possible inside the cabin (rx) and cargo space (tx), without interfering with the functionality ...
4 transmitter (tx) black gnd red 11-32v dc camera wiring diagram monitor receiver (rx) ﹢ 12v gnd video audio.
5 n cleaning & maintenance 1.Make sure the power to the te-wtr system is disconnected. Gently remove any foreign material on the housing by rubbing the surface lightly with a wet, soft cloth. 2.During cleaning, please make sure there is no water ingress between the antenna terminal and the antenna. ...
Specifications operating frequency modulation system max. Range operating temperature operating current ip rating power supply video input audio input tpu cable length dimensions weight power supply video output audio output pixels tv system frame rate tpu cable length dimensions weight 2400mhz-2483...
Important if you are having difficulties with the installation of this product, please call our tech support line at 1-800-253-tech. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle...
