IBeam TE-WTR User Manual - Installation
3
Transmitter (TX)
The TX should be
installed on top of the
roof from the cargo
space or under the
bottom of the cargo
space.
Receiver (RX) and Transmitter (TX)
The modules should be installed as high as possible inside the cabin
(RX) and cargo space (TX), without interfering with the functionality
of the vehicle. Route cables avoiding areas that may pinch or
damage the wires. On the TX module, connect the red wire to a
switched +12V power source and the black wire to ground (a non-
painted bare metal surface). Orientate antennas parallel to each
other for optimal performance.
Installation
Power
Link
Antenna
Power LED
Link LED
Pairing button
Pair
4)) In case another RX or TX needs to be connected (for example,
during exchange of trucks and trailers each other), then please
repeat above steps 1~3.