1. DL manuals
  2. IBM
  3. Server
  4. 2809
  5. Instruction

IBM 2809 Instruction

Manual is about: 2809 or 2824 LAN/WAN Workstation Card

Summary of 2809

  • Page 1

    As/400e 170 or 250 2809 or 2824 lan/wan workstation card instruction version 4 seng-2809-04.

  • Page 3

    As/400e 170 or 250 2809 or 2824 lan/wan workstation card instruction version 4 seng-2809-04.

  • Page 4

    Note before using this information and the product it supports, be sure to read the “safety and environmental notices” on page iii and the “notices” on page 11. Fifth edition (july 2000) this edition applies only to reduced instructions set computer (risc) systems. © copyright international business...

  • Page 5

    Safety and environmental notices danger notices a danger notice calls attention to a situation that is potentially lethal or extremely hazardous to people. Danger an electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the system or the products that attach t...

  • Page 6

    Laser safety information caution: this product may contain a cd-rom which is a class 1 laser product. (rsftc240) product recycling and disposal components of the system, such as structural parts and circuit cards, can be recycled where recycling facilities exist. Ibm does not currently collect and r...

  • Page 7: Installation Instructions

    Installation instructions this feature is customer installed. It will take approximately 1 hour to install the hardware. However, you may elect not to perform this feature installation yourself. You may contact ibm or an authorized dealer to make arrangements for them to perform the feature installa...

  • Page 8

    When you have the following cards, install them in the sequence listed below. V the 2809 or 2824 lan/wan workstation card v the 285x or 2866 integrated netfinity cards v all other adapter cards getting ready __ 1. Ensure that all jobs are complete. __ 2. When all jobs are complete, type pwrdwnsys *i...

  • Page 9

    Installing the 2809 or 2824 lan/wan workstation card __ 1. The adapter card slots are e02 through e14 in the expansion unit, (figure 2). Slot e01 is not an available position. __ 2. Remove the left side cover by removing the screws and sliding the cover from front to back until it stops. Pull the co...

  • Page 10

    Your system unit contains a battery that only trained personnel can replace. __ 3. Caution: the battery is a lithium battery. Only trained service personnel may replace this battery using the instructions in the problem analysis, repair, and parts service manual. To avoid possible explosion, do not ...

  • Page 11

    __ 5. You will be installing the 2809 or 2824 card in card slot e07. __ 6. Before you install the adapter card, remove the adapter card slot cover inside the system unit by doing the following: a. Remove the screw, (figure 5 on page 6). B. Slide the slot cover out. Figure 4. Attach wrist strap insta...

  • Page 12

    __ 7. Find the package that contains the new adapter card. Attention: adapter cards are fragile: v handle only by the edges v keep fingers off printed circuit area v use static strap when handling v leave in protective packaging until ready to install remove the adapter card from the electrostatic p...

  • Page 13

    __ 9. Do you have any other adapter cards or devices to install? No yes ↓ if you know where to install the adapter card, follow the steps you just performed to install the card. If you do not know where to install the adapter card, go to the instructions that came with the adapter card. Look for the...

  • Page 14

    Completing the installation __ 1. Install the system unit back cover. __ 2. Danger an electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the system or the products that attach to the system. It is the customer’s responsibility to ensure that the outlet is c...

  • Page 15

    __ 4. Look at the function/data display on the control panel. Does a b n appear in the function/data display? Yes no ↓ do the following: a. Press the up or down select push button until 02 appears in the function/data display. B. Press the enter push button on the control panel. C. Press the up or d...

  • Page 16

    No yes ↓ verify that the card you moved is listed on the packaging hardware resources menu. If a resource is missing (look for a ?) because an adapter card was moved, do the following: 1) on the line that has the question mark, type a 4 in the opt column to remove the resource from the configuration...

  • Page 17: Notices

    Notices this information was developed for products and services offered in the u.S.A. Ibm may not offer the products, services, or features discussed in this document in other countries. Consult your local ibm representative for information on the products and services currently available in your a...

  • Page 18

    If you are viewing this information softcopy, the photographs and color illustrations may not appear. The drawings and specifications contained herein shall not be reproduced in whole or in part without the written permission of ibm. Ibm has prepared this publication for use by customer personnel fo...

  • Page 19

    This product is in conformity with the protection requirements of eu council directive 89/336/eec on the approximation of the laws of the member states relating to electromagnetic compatibility. Ibm cannot accept responsibility for any failure to satisfy the protection requirements resulting from a ...

  • Page 20

    14 as/400e 170 or 250 2809 or 2824 lan/wan workstation card v4r5.

  • Page 21

    Readers’ comments — we’d like to hear from you as/400e 170 or 250 2809 or 2824 lan/wan workstation card instruction publication no. Seng-2809-04 overall, how satisfied are you with the information in this book? Very satisfied satisfied neutral dissatisfied very dissatisfied overall satisfaction h h ...

  • Page 22: Business Reply Mail

    Readers’ comments — we’d like to hear from you seng-2809-04 seng-2809-04 cut or fold along line cut or fold along line fold and tape please do not staple fold and tape fold and tape please do not staple fold and tape no postage necessary if mailed in the united states business reply mail first-class...

  • Page 24

    Printed in the united states of america on recycled paper containing 10% recovered post-consumer fiber. Seng-2809-04.