IBM 4910-33S Installation Manual - page 31
id = "PCI\VEN_1002&DEV_436E&SUBSYS_436E1002", "Si3112"
id = "PCI\VEN_1002&DEV_436E&SUBSYS_B0021458", "Si3112"
id = "PCI\VEN_1002&DEV_4379&SUBSYS_43791002", "Si3112"
id = "PCI\VEN_1002&DEV_437A&SUBSYS_437A1002", "Si3112"
[HardwareIds.SCSI.Si3112_NT]
id = "PCI\VEN_1095&DEV_3112&SUBSYS_31121095", "Si3112"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_34238086", "Si3112"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_311215D9", "Si3112"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_B0021458", "Si3112"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_01661028", "Si3112"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_82141033", "Si3112"
id = "PCI\VEN_1095&DEV_3112&SUBSYS_82641033", "Si3112"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_35121095", "Si3112"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_01661028", "Si3112"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_82641033", "Si3112"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_35121014", "Si3112"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_02B71014", "Si3112"
id = "PCI\VEN_1095&DEV_3512&SUBSYS_b0021458", "Si3112"
id = "PCI\VEN_1002&DEV_436E&SUBSYS_436E1002", "Si3112"
id = "PCI\VEN_1002&DEV_436E&SUBSYS_B0021458", "Si3112"
id = "PCI\VEN_1002&DEV_4379&SUBSYS_43791002", "Si3112"
id = "PCI\VEN_1002&DEV_437A&SUBSYS_437A1002", "Si3112"
[Config.Si3112]
value = ProblemDevices, "", REG_SZ, ""
value = ProblemDevices, "Maxtor 4D060H3 DAK05GK0", REG_SZ, "MaxMode = UDMA-5"
value = ProblemDevices, "ST320012AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST330013AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST340017AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST360015AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST380023AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST3120023AS", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST340014ASL", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST360014ASL", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST380011ASL", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST3120022ASL", REG_SZ, "Mod15Write"
value = ProblemDevices, "ST3160021ASL", REG_SZ, "Mod15Write"
2. Winpeoem.sif
; WinPE OEM driver list
;
[Version]
signature="$Windows NT$"
;
; Use this section to replace the inbox driver
; list with your own files
;
;[massstoragedrivers.replace]
;mydriver = mydriver.sys
;
;
; Use this section to append non-pnp drivers to
; the list of the drivers already present
; in the inbox
;[massstoragedrivers.append]
;mydriver = mydriver.sys
;
;
; Use this section to load pnp/non-pnp oem drivers
; in addition to the inbox driver list
;
; OemDriverRoot : Indicates the path relative to
; the system directory of WinPE. If
; none, then specify ""
;
; OemDriverDirs : Specifies series of directories separated
; by comma. Each specified directory has the
; txtsetup.oem which has the information on
; what driver to load.
;
; e.g. OemDriverRoot = "" and OemDriverDirs = drv1, drv2
; indicates to the WinPE that under WinPE's system32 directory
Chapter 5. Installing Windows Embedded for Point Of Service on SurePOS 300 (Models E3H, 33H and 330)
17