ICarsoft Honda/Acura Multi-system Scanner i990 User Manual - page 7
iCarsoft Honda/Acura Multi-system Scanner i990
7
If the scan tool won’t power up or operates
incorrectly in any other way, you need to do the
following to check up:
A) Check if the scan tool’s OBD II connector
is securely connected to the vehicle’s DLC;
B) Check if the DLC pins are bent or broken.
Clean the DLC pins if necessary.
C) Check vehicle battery to make sure it is still
good with at least 8.0 volts.
Summary of Honda/Acura Multi-system Scanner i990
Page 1
Icarsoft honda/acura multi-system scanner i990 1 index 1.safety precautions and warnings ................... 2 2. Using the scan tool .............................. 4 2.1 tool description ............................... 4 2.2 specifications ................................. 5 2.3 accessories include...
Page 2
Icarsoft honda/acura multi-system scanner i990 2 1.safety precautions and warnings to prevent personal injury or damage to vehicles and/or the scan tool. Read this instruction manual first and observe the following safety precautions at a minimum whenever working on a vehicle. ·always perform automo...
Page 3
Icarsoft honda/acura multi-system scanner i990 3 gasoline/chemical/electrical fires nearby. · don’t connect or disconnect any test equipment while the ignition is on or the engine is running. · keep the scan tool dry, clean, free from oil/water or grease. Use a mild detergent on a clean cloth to cle...
Page 4
Icarsoft honda/acura multi-system scanner i990 4 2. Using the scan tool 2.1 tool description ①dlc -- data link connector (dlc), use to connect the scan tool to the vehicle; ② lcd display -- indicates test results. Color,.
Page 5
Icarsoft honda/acura multi-system scanner i990 5 320 x 240 pixel display with contrast adjustment ③ key broad – include [ ][ ][ ][ ][ ] [ ] [help] ④ usb port -- use to connect the scan tool to pc; 2.2 specifications a) display: color, 320 x 240 pixel display with contrast adjustment b) operation tem...
Page 6
Icarsoft honda/acura multi-system scanner i990 6 c) cd – save the update tool and user’s manual. 2.4 product troubleshooting vehicle linking error a communication error occurs if the scan tool fails to communicate with the vehicle’s ecu (engine control unit). You need to do the following to check up...
Page 7
Icarsoft honda/acura multi-system scanner i990 7 if the scan tool won’t power up or operates incorrectly in any other way, you need to do the following to check up: a) check if the scan tool’s obd ii connector is securely connected to the vehicle’s dlc; b) check if the dlc pins are bent or broken. C...
Page 8
Icarsoft honda/acura multi-system scanner i990 8 3. Software function cation: don’t connect or disconnect any test equipment with ignition on or engine running. 1) turn the ignition off. 2) locate the vehicle’s 16-pin data link connector (dlc) 3) plug into the scan tool cable connector to the vehicl...
Page 9
Icarsoft honda/acura multi-system scanner i990 9 use the key [ ][ ] to select in the [main menu] , and press [ ] to select 3.1 system configuration select [system configuaration] in the main menu and press [ ]. The screen will display the interface as shown below: the scanner allows you to make the ...
Page 10
Icarsoft honda/acura multi-system scanner i990 10 1) [system information]: show the system information choose [system information] and press [ ]. The screen will display the interface as shown below: press [ ] or [ ] to return the [main menu] 2) [beeper]: on / off the beep. Choose [beeper] and press...
Page 11
Icarsoft honda/acura multi-system scanner i990 11 4. Diagnostics select [diagnose] in main menu and press [ ]. The scanner will communicate with the vehicle , if the scanner can not communicate with the vehicle , it will display the error message, as shown below: if the scanner can communicate with ...
Page 12
Icarsoft honda/acura multi-system scanner i990 12 select one system and press[ ], the scanner will communicate with the system . ◆ if the scanner communication fail with the vehicle’s ecu, a “error” message shows up on the display ◆ if the scanner communicates successfully with the vehicle, it will ...
Page 13
Icarsoft honda/acura multi-system scanner i990 13 press [ ][ ] to select, [ ] and [ ] to page, and press [ ] to confirm. 4.1 read trouble code ◆reading codes can be done with the key on engine off (koeo) or with the key on engine running (koer). ◆trouble codes cause the control module to illuminate ...
Page 14
Icarsoft honda/acura multi-system scanner i990 14 press [ ] or [ ] to return the [diagnostic menu] view dtcs and their definitions on screen. if there are no diagnostic trouble codes present, the display indicates “no trouble code” wait a few seconds or press any ok to return to diagnostic menu. ...
Page 15
Icarsoft honda/acura multi-system scanner i990 15 menu]. The screen will display the interface as shown below: press [ ] or [ ] to return the [diagnostic menu] notes: * before performing this function. Make sure to retrieve and record the trouble codes. * after clearing, you should retrieve trouble ...
Page 16
Icarsoft honda/acura multi-system scanner i990 16 press[ ][ ] to select [read datastream] in [diagnostic menu] and press [ ] to confirm. The screen will display the interface as shown below. Data model if appear [graph], press [ ] to enter graph mode. Press [ ] to return [diagnostic menu] the screen...
Page 17
Icarsoft honda/acura multi-system scanner i990 17 graph model press [ ] to return data model. Press [ ] to return [diagnostic menu]..
Page 18
Icarsoft honda/acura multi-system scanner i990 18 5.software update 1. Setup update tools put the cd in to pc and open. You can see the setup file in the cd. Double click the [setup file] to setup the tool. Operate following the instructions, and finish to setup..
Page 19
Icarsoft honda/acura multi-system scanner i990 19 after finish setup , there is an icon of scanner in desktop. 2. Run the update tool and operate in accordance with photographs.
Page 20
Icarsoft honda/acura multi-system scanner i990 20 a) use the usb cable to connect i910 scanner with pc b) run the update software. When the scanner connect with pc , the software will show [usb connected], as below:.
Page 21
Icarsoft honda/acura multi-system scanner i990 21.
Page 22: Warnning:
Icarsoft honda/acura multi-system scanner i990 22 1)click [update] button. 2)click [ ] to find the update file 3)select update file and click [open] button. 4) into the upgrade interface, wait for the end of upgrade warnning: do not power off during upgrade! Do not plug or unplug usb tools during up...
Page 23
Icarsoft honda/acura multi-system scanner i990 23 start update waiting for a few minutes. The software will update the scanner tool. Finish update when the update is finished, the screen on pc will show as below..
Page 24
Icarsoft honda/acura multi-system scanner i990 24 if update success, the software will display [update success!]; if update not success, it will display [update fail! Try again]. Press [finish] , the scanner is already updated ,and you can unplug the scanner from pc..