9ch dvr quick start guide v1.0(n04)- p.1 us916z/us916zd rvh9000z/9000zd hybrid hd dvr quick start 1. Packing........................................P2 2. Hard disk installation.................P3 3. Dvd-rw installation....................P4 3. Front panel controls...................P5 4. Rear panel ...
9ch dvr quick start guide v1.0(n04)- p.2 1. Dvr 2. Quick start 3. Ir remote control 4. Battery 5. Cd 6. Hard disk mount 7. Screws 8. Power adaptor and cable 10. Sata cord note: standard shipping products do not include hard drive unless you had ordered your dvr with hard drive. All hard drives if or...
9ch dvr quick start guide v1.0(n04)- p.3 step 1) fix the hdd to rack mount with the screws as indicated. Left side right side step 2) place the hdd on the hdd plate and screw it as indicated. Step 3) connect the power and the sata cables as indicated. Note: after installation, please initialize hard...
9ch dvr quick start guide v1.0(n04)- p.4 step 1: remove the front cover from dvr. Step 2: put the dvd-rw into the unit as indicated. Step 3: put dvr bottom up, screw to fix the dvd-rw as indicated. Step 4: connect the power and the flat cables as indicated..
9ch dvr quick start guide v1.0(n04)- p.5 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ control keys description ○ 1 dvd writer optional dvd-rw backup device. ○ 2 usb 2.0 port port for usb external devices (usb flash drive devices use, the mouse behind the back of the usb ports installed).. ○ 3 led display (from left to rig...
9ch dvr quick start guide v1.0(n04)- p.6 rear panel connectors ○ 3 ○ 1 ○ 7 ○ 4 ○ 5 ○ 6 ○ 2 ○ 8 ○ 9 ○ 10 ○ 11 ○ 12 ○ 13 ○ 14 ○ 15 ○ 16 ① main monitor bnc port for the main monitor. ② hd video in sdi input port for hd camera. ③ video in bnc input ports for cameras, 8 in total. ④ audio out rca output p...
9ch dvr quick start guide v1.0(n04)- p.7 ⑯ hdmi hdmi port. You can monitor all the channels, listen to audio signal and have some related operations under live mode. This paragraph describes the ir remote control, mouse operation and on screen graphical icons under live mode. Table 6-1.1 functions o...
9ch dvr quick start guide v1.0(n04)- p.8 table 6-1.2 graphical icons that will display after right-clicking your mouse under live mode. Icon description resting the cursor on this icon will bring up the following four menu icons. Main menu. Search menu. Backup menu. Ptz mode. Turn on/off recording. ...
9ch dvr quick start guide v1.0(n04)- p.9 table 6-1.3 description of on screen graphical icons in live mode icon description recording is on schedule recording is on live audio is on live audio is off motion detected on the channel video loss detected on the channel usb device detected connected to t...
9ch dvr quick start guide v1.0(n04)- p.10 switch to playback mode by pressing “play” under the live mode, the graphical icon will show up on the upper center of the screen and the operation panel ( see below picture) will show up at right lower corner of the screen. You can drag the panel by mouse t...
9ch dvr quick start guide v1.0(n04)- p.11 5 channel display zoom-in display if you want to monitor single channel, please choose a channel and click left but ton of mouse two times..
9ch dvr quick start guide v1.0(n04)- p.12 switch to the ptz mode by pressing “ptz” button under the live mode. The ptz ico n will appear on upper left side of screen and the control panel will appear on th e down right side of screen. Table 8-1 mouse operation under the ptz mode icon description lea...
