ICatch RVH9000Z Quick Start Manual - page 12
9CH DVR Quick Start Guide V1.0(N04)- P.12
Switch to the PTZ mode by pressing “PTZ” button under the LIVE mode. The PTZ ico
n
will appear on upper left side of screen and the control panel will appear on th
e down right side of screen.
Table 8-1 Mouse operation under the PTZ mode
Icon
Description
Leave PTZ Mode
,back to the LIVE mode
Pre-set number N. (0~255)
Go to pre-set number N.
Set current PTZ location at pre-set number N.
「TOUR」,press to activate pre-set tour
*
「PIP」,Set current PTZ location as the start of line-scan.
*
「FREEZE」, Activate line-scan.
*
「ZOOM」,Set current PTZ location as the end of line-scan.
*
To move PTZ in 360
°
PTZ zoom in; PTZ zoom out
PTZ focus in; PTZ focus out.
PTZ IRIS open, PTZ IRIS close.
Below functions need support from specific PTZ manufacturer.
Please check user manual of your PTZ for more detail.
to
AUX 1~8,
「AUTO」Key + Number key「1~8」
「Backup」, Customized function。
*
*
*
* PTZ communication protocols from different brands aren’t compatible 100%
sometimes. Therefore, some of these functions may be unavailable.