Ice IB2000 Operator's & Parts Manual - page 7
OPERATION OF HIGH SPEED FLOOR MACHINE
ICE IB2000
6
OPERATOR
General Use:
1) Remove any obstructions or other obstacles in the area which is to be cleaned.
2) Remove dust recovery bag and empty it out in a trash receptacle. Replace dust recovery bag
on machine, ensuring it is sealed tightly to the machine.
3) Place handle in upright position and tilt machine back until handle rests on the floor.
Be sure the machine is not plugged into an outlet.
7) Adjust the handle (switch housing) height to a comfortable operating position.
8)To start the machine, push on the Blue safety button of the top of upper switch housing and
squeeze either of the switch levers.
9) When the machine is in operation, both hands should be placed on the handle (switch
housing).
10)Once the machine has reached operating speed, look at the digital pad pressure meter
located on the top of the motor cover. There are 2 light colors which will help you determine
optimal pad pressure for operating the machine. YELLOW LIGHT(left): If one or both
yellow lights are illuminated, adjustment handle position to increase the pad pressure.
RED LIGHT(right): If one or both red lights are illuminated, adjustment handle position to
reduce the pad pressure. GREEN LIGHT(S): If one, two, three, or four green lights are
illuminated, the machine is running at the optimal pad pressure and you may begin working.
11) When the machine is in operating, both hands should be gripping the hand.
12)To stop the machine at any time, simply release the switch lever, and the machine will stop
automatically.
Do not use an extension cord in conjunction with the standard power cord.
4) Remove the pad center gripping device by unscrewing the thumbscrews.
5) Place a "ICE approved" burnishing pad on the pad driver and re-attach the
center gripping device. (check with your ICE distributor for approved pads)
6) Place machine back into its upright position.
THIS IS A SPECIALIZED MACHINE WHICH REQUIRES THE OPERATOR TO UTILIZE
A ICE APPROVED PAD, AND MUST BE ADJUSTED PROPERLY TO ENSURE THE
HIGHEST POSSIBLE PERFORMANCE AND PRODUCTIVITY.
Read operators manual thoroughly prior to operating or servicing this machine.
7) Plug power cord into grounded outlet.