Ice IB2000 Operator's & Parts Manual - page 8
ICE IB2000
7
OPERATOR
STORAGE
1) Unplug machine from power source and wrap cord on handle.
2) Store in upright position in a dry area.
MAINTENANCE
To keep the machine performing well for many years, please follow the following maintenance
procedures.
Always confirm that the machine is unplugged prior to performing any
maintenance or repairs.
1. Unplug machine as soon as you are done using it.
2. Remove dust recovery bag and empty contents into a trash receptacle.
inspect dust recovery bag for any damage prior to replacing it on the machine.
3. Clean the outside of the machine with a mild cleaner.
4.Check power cord for any damage. If any damage is detected, replace the cord immediately.
5. Lubricate wheels with a water resistant lubricant once a month.
6. Check machine for loose or missing nuts and bolts, and replace as necessary.
7. If the machine is used in a dusty environment, you may remove the motor cover and blow
the motor clean with compressed air. This will allow for good ventilation and help the motor run
cooler.
The motor is computer controlled, and utilizes computer circuitry. Do not allow
this circuitry to get wet! Never store a low speed machine with the pad driver
or brush mounted