Ice IW80 Operator's & Parts Manual - Preventative Maintenance
ICE IW80
8
OPERATOR
PREVENTATIVE MAINTENANCE
To keep the machine performing well for many years, please follow the following maintenance
procedures.
Before performing any maintenance on the machine, be sure that the power is
turned off and the cord is unpluged.
Repairs are to be completed by Authorized Service Centers only. Any repairs
completed by unauthorized persons will void the warranty.
1) Unplug machine as soon as you are done using it.
2) Check power cord for any damage. Replace the cord immediately if any damage is detected.
3) Lubricate casters with a water resistant lubricant every month.
4) Check machine for loose or missing nuts and bolts, replace them if necessary.
5) Check the filter, and clean it after each use.
6) Check the vacuum hose for any holes and clogs.
7) Clean the outside of the machine with a mild cleaner.
MACHINE STORAGE
1) Unplug machine from power source and wrap the cord on the right clamp.
2) Reposit all the accessories.
3) Store in upright position in a dry area.
4) Store with the power head moved if necessary so the tank may breathe.
Note: The carbon brushes of the motors may need to replace due to normal wear and tear
caused by using the machine overtime. They can only replaced by authorized distributor.