- DL manuals
- Ice-O-Matic
- Ice Maker
- ICE0250 Series
- Installation And Maintenance Manual
Ice-O-Matic ICE0250 Series Installation And Maintenance Manual
Summary of ICE0250 Series
Page 1
Ice-o-matic 11100 east 45th ave denver, colorado 80239 part number 9081264-01 print date 3/05 installation, start-up and maintenance manual ice series cubers ice0250 through ice2100 series* *includes undercounter and 22 inch series.
Page 2
Ice series forward page i how to use this manual ice-o-matic provides this manual as an aid to the service technician in installation and maintenance of the ice series (electro-mechanical) cube ice machines. Do not attempt to perform installation, start-up or maintenance unless you have read and ful...
Page 3
Ice series table of contents page ii forward page i table of contents page ii freight claim procedure page iii warranty page iv model number and serial number format page 1 installation guidelines page 2 remote condenser guidelines page 4 electrical and plumbing requirements page 6 how the machine w...
Page 4
Ice series freight claim procedure page iii freight claims important! Inspect promptly this merchandise has been carefully inspected and packed in accordance with the carrier’s packing specifications. Responsibility for safe delivery has been assumed by the carrier, if loss or damage occurs, you as ...
Page 5
Ice series warranty page iv ice-o-matic parts and labor domestic & international warranty mile high equipment company (the “company”) warrants ice-o-matic brand ice machines, ice dispensers, remote condensers, and ice storage bins to the original user customer against defects in material and factory...
Page 6
Ice series model and serial number format page 1 model and serial number format the serial number format and machine specifics are detailed on the data plate. Ice 040 0 h a 2 design level condenser type: a=air, w=water, r=remote cube size: h=half, f=full voltage: 0=115v, 6=230v/60hz. 5=240v/50hz. Ap...
Page 7
Ice series installation guidelines page 2 installation guidelines for proper operation of the ice-o-matic ice machine, the following installation guidelines must be followed. Failure to do so may result in loss of production capacity, premature part failures, and may void all warranties. Reference t...
Page 8
Ice series installation guidelines page 3 secure the machine on top of the bin or dispenser. Attach the ice machine to the bin with the mounting straps provided with the bin or dispenser. If the ice machine is to be mounted on a bin or dispenser other than an ice-o-matic, refer to the manufactures i...
Page 9
Ice series remote condenser guidelines page 4 remote condenser installation for proper operation of the ice-o-matic ice machine, the following installation guidelines must be followed. Failure to do so may result in loss of production capacity, premature part failure, and may void all warranties. Re...
Page 10
Ice series remote condenser guidelines page 5 the ice0500r3, ice0606r3, ice806r3, ice1006r3, ice1606hr3 and ice1506r2 remote ice makers incorporate the mixing valve in the condenser. This configuration allows up to a 100 foot calculated remote line set run. Reference the diagram below to calculate t...
Page 11
Ice series electrical and plumbing requirements page 6 electrical and plumbing requirements: iceu150, 220, 225 and 226 note: the iceu150, 220, 225 and 226 do not have a splash curtain. These models utilize a thermostatic bin control in place of a mechanical bin switch..
Page 12
Ice series electrical and plumbing requirements page 7 electrical and plumbing requirements: iceu300 note: the iceu300 series do not have a splash curtain. This models utilize a thermostatic bin control in place of a mechanical bin switch.
Page 13
Ice series electrical and plumbing requirements page 8 electrical and plumbing requirements: ice0250, ice0400, ice0500 ice0600
Page 14
Ice series electrical and plumbing requirements page 9 electrical and plumbing requirements: ice0806 and ice1006.
Page 15
Ice series electrical and plumbing requirements page 10 electrical and plumbing requirements: 48 inch wide cubers.
Page 16
Ice series electrical and plumbing requirements page 11 electrical and plumbing requirements: 22 inch wide cubers.
Page 17
Ice series electrical and plumbing requirement page 12 electrical and plumbing requirements: ice1606 remote.
Page 18
Ice series electrical and plumbing requirements page 13 electrical and plumbing requirements: ice1506 remote.
Page 19
Ice series how the ice machine works page 14 how the ice machine works a general description of how the ice series cubers work is given below. With the ice/off/wash switch in the ice position, the compressor, water pump and condenser fan motor (when applicable) will energize starting the freeze cycl...
Page 20
Ice series start-up procedure page 15 start-up procedure before starting the machine, make sure the machine is level within 1/8 inch in all directions, the bin or dispenser leg height can be adjusted by rotating the leg foot. Check the water level in the water trough. It should be approximately ½ in...
Page 21
Ice series start-up procedure page 16 bin control operation the bin control is used to shut the machine off when the bin fills with ice. The bin control must be checked upon installation or initial start-up and when performing maintenance. Adjustments are not covered under warranty. There is one bin...
Page 22
Ice series general maintenance page 17 electrical shock and/or injury from moving parts inside this machine can cause serious injury. Disconnect electrical supply to machine prior to performing any adjustments or repairs. Failure to perform the required maintenance at the frequency specified will vo...
Page 23
Ice series cleaning procedure page 18 ice machine cleaning and sanitizing instructions 1. Remove the ice machine front panel. 2. Make sure that all the ice is off of the evaporator. If ice is being made, wait for cycle completion, then turn the machine “off” at the ice/off/wash selector switch. 3. R...
Page 24
Ice series cabinet care page 19 cleaning stainless steel commercial grades of stainless steel are susceptible to rusting if not properly maintained. It is important that you properly care for the stainless steel surfaces of your ice machine and bin to avoid the possibility of rust or corrosion. Use ...
Page 25
Ice series winterizing procedure page 20 winterizing procedures important! Whenever the ice machine is taken out of operation during the winter months, the procedure below must be performed. Failure to do so may cause serious damage and will void all warranties. 1. Turn off water to machine. 2. Make...
Page 26
Ice series service history page 21 service history model number__________________serial number__________________date installed__________ __________________________________________________________________________________________ ________________________________________________________________________...