ICentral 10.2 Premium Installation & Operation Manual - Operating Instructions
17
Operating Instructions
HOw tO MOnItOr aUdIO & vIdeO InpUtS
your 10.2 Intercom System has four Audio/Video inputs that can be viewed at any room
station.
Inputs 1 & 2 provide audio and video signals from door1 and door2.
Inputs 3 & 4 provide audio and video signals from two optional A/V sources such as CCTV
cameras, TV tuners, MP3 players and many other types of devices for surveillance or
entertainment.
Press
Monitor
to display video from door1.
the image will display for 30 seconds.
Press
Monitor
again to display video from door2.
the image will display for 30 seconds.
Press
Monitor
again to display video and audio from A/V Input 1.
Press
Monitor
again to display video and audio from A/V Input 2.
Note 1. The image and audio (if connected) from A/V1 & A/V2 will remain on until another
input is activated or
is pressed.
Note 2. If a call is made from a door station while an A/V input is being monitored, the display
will switch to allow the call from the front door. When the call is completed the display will
return to the previous A/V input.