Icetro SSM- 420 User Manual - page 17
17
7.3.2 Cleaning the product
①
Prepare the solution mixed with five liters of warm water and kitchen detergent.
Do not use a strong detergent.
②
After inserting the mixed solution that does not harm the food, turn on the slush
supply switch to extract the solution.
③
Frequently empty the remaining materials in the material box and drain box and clean them.
⑤
Do not spill any liquid on the cover of the motor that is on the rear of the product.
⑥
Likewise, use a soft bristle brush to clean the evaporator
’
s cylinder.
⑦
Use clean cold water for cleaning the parts.
⑧
Be sure to clean the filter.
④
Use the proper brushes to clean the disassembled parts using the washing detergent.
Warning
Never clean the parts in the dish washer.
Warning
In order not to give damage to the product, use the washing detergent for cleaning plastic
parts.
Caution
Turn off the freezing switch.
It may cause spiral freezing and motor failure.
Caution
When cleaning the product, be careful not to insert water in the electrically running parts. It
may cause an electric shock or product failure.
As shown in the figure, on a monthly basis, open the cover of the condenser,
clean the filter with lukewarm water (about 25
℃
) or
neutral detergent solution, dry it, and attach it back
to its original position. If ventilation is not made due
to accumulated dust, slush is not smoothly formed
and machine failure may follow. When the troubles
are caused by careless use or user faults such as
no filter cleaning, you can get a charged service.
Cleaning the condenser
1. Separate the SIDE PANEL L
2. Use a vacuum cleaner or hand cleaner to remove dust
from the condenser