Iclebo Arte YCR-M05 User Manual - ●
Using the robot cleaner
10
※
Make sure to set time for timer cleaning.
1. Press the Clock button on the remote
control. Time display of the display
screen will flash.
3. Press Enter button to confirm the setting.
4. Set “minute” with (+)(-) button of the remote control and press Enter button
5. Press Enter button to confirm the setting.
6. When the time is set, it confirms the setting with beep sound.
2. Set “hour” with (+)(-) button of the
remote control, and press Enter
button.
Attach the tape at the top of stairs where there is a danger of falling.
→ If dust accumulates on the fall prevention sensors they may not “see downwards” & not prevent the robot
from falling.
※
Attach it on the space to prevent the vacuum
cleaning robot from entering.
Install area boundary tape
1
2
3
1
2
3
Bottom
side
Bottom
side
●
Installing the r
obot c
leaner
Current Time setting
●
Usa
ge of
r
obot c
leaner
Press power button ( ).
If you press it one more time,
it is turned off.
Basic cleaning
: AUTO+ CLIMB
1. Press the power button ( ).
※Check if lights come on
AUTO and CLIMB mode
in the display window.
2. Press start button ( ).
※You can click CLIMB button on the remote
control to cancel Climb mode. (If CLIMB
mode is off, the robot does not go over doorsills or
climb onto the carpet or rugs over 0.2” in height.)
Start/stop cleaning
Power On/Off