Icom CS-207 Operating Manual - page 2
MENU FLOW
Push
or [Esc] to select the TOP menu.
l
The TOP menu lightens,
l
screens and operations can be selected from the TOP menu.
Push
to call
up
the help message.
To select a SUB menu, push
the highlighted key; or select
with the
keys then
push [Enter] or [
The screen darkens when the
TOP
menu is selected.
File
Screen
Clone
Load
Memory CH
Read
TR
Current
Display Type
Save
VFO
Write
TR
All
Wallpaper
Delete
DTMF
Information
RS-232C
D
OS
Common
Call Sign
Preset
,
SUB MENU
DESCRIPTION
SUB MENU
DESCRIPTION
Load
Loads data from a saved file.
Read
TR
Reads clone data from a connected
Save
Saves data to a desired file. File
transceiver.
extension
is added automatically.
Sends clone data to a connected
Delete
Deletes a file.
Write
TR
transceiver.
D
O S
Allows you to use a DOS command. To
Shows the connected transceiver model
return to the previous screen, type
Information
and clone comment.
“EXIT” then push [Enter].
Loads a preset file. Moves the cursor
Current
Prints out currently displayed screen
Preset
to the first memory channel for input in
data.
the V or U memory channel screen.
Prints out all set data.
Quits and exits the program, then
returns to the DOS prompt.
Selects the display type from color
Sets the operating frequency, duplex
Type
and monochrome. Customized colors
Memory
CH
setting, etc. for call, memory and scan
can be used.
edge channels.
Wallpaper
Selects the wallpaper. This can be
Sets the operating frequency, duplex
previewed before selection,
setting, etc. for VFO.
D
T M F
Sets the DTMF codes, DTMF
232C
Selects one of the computer’s
ports for cloning connection.
transmission speed, etc.
C
Sets commonly used data, such as set
Call
Enters your call sign.
ommon
mode settings, initial set mode settings,
cloning comments, etc.