Icom CY 5000 Instruction Manual - Operation
of
16
4
OPERATION
■
Turning power ON
➀
On rear panel, toggle AC Power Switch up to
turn AC power ON.
■
Receiving and transmitting
Receiving
➀
Connect optional Field service Aid
Microphone/Speaker.
•When receiving a signal, RX indicator turns ON
and audio is emitted from the speaker.
Transmitting for Local Control
➀
Take the microphone off hook.
➁
Wait for the channel to become clear.
➂
Push and hold [PTT] to transmit, then
speak into the microphone at your normal
voice level.
➃
Release [PTT] to receive.
IMPORTANT:
To maximize the readability of the transmitted
signal:
(1) Pause briefly after pushing [PTT].
(2) Hold the microphone 1 to 2 inch (2.5 to
5 cm) from your mouth, then speak into
the microphone at a normal voice level.
8