Icom IC-2720H Operating Manual
Icom IC
–2720H Mini–Operating Guide by W5JCK, September 2007
Page 1 of 6
Icom IC-2720H VHF/UHF Radio
Mini
–Operating Guide by W5JCK
1
[
PWR
]
Power Switch
Press and hold 1 sec. to turn power On/Off.
2
[
SET●LOCK
]
Set, Lock Switch
● Press to enter Set mode.
● Press and hold for 1 sec. to switch the
Lock function On or Off.
3
[
LOW●PRIO
]
Output Power, Priority Switch
● Press to change the power output level.
● Press and hold for 1 sec. to start the
Priority Watch operation.
4
[
TONE●DTMF
]
Tone, DTMF Switch
● Press to select a Tone function.
● Press and hold for 1 sec. to turn DTMF
memory encoder On or Off.
5
[
DUP●MONI
]
Duplex, Monitor Switch
● Press to select between DUP-, DUP+, and
Simplex operation.
● Press and hold for 1 sec. to switch the
Monitor function On or Off.
6
[
MAIN●BAND
]
L/R Band Switches
● Press to select the main band for L/R side.
● Press and hold for 1 sec. to select
operating frequency band for L/R side.
7
[
V/MHz●SCAN
]
L/R VFO/MHz Tuning, Scan
Switches
● Press to select between VFO mode and 1
MHz Tuning mode for L/R side.
● Press and hold for 1 sec. to start scan for
L/R side.
● Press to stop a scan for L/R side.
8
[
M/CALL●MW
]
L/R Memory/Call, Memory
Write Switches
● Press to select between Memory, Call, and
Weather Channel modes for L/R side.
● Press and hold for 1 sec. to select a
memory channel for L/R side for
programming.
9
[
VOL
]
L/R Volume Control Switches
Turn to adjust audio for L/R side.
10
[
DIAL
]
L/R Tuning Dials
Turn to select operating frequency, memory
channel, setting for Set mode item, or
scanning direction for L/R side.
11
[
SQL
]
L/R Squelch Control Switches
Turn to adjust squelch level for L/R side.