Icom IC-91A Service Manual - Section 4
Other manuals for IC-91A:
Instruction Manual, Service Manual
of
6
SECTION 4
UT-121 UNINSTALLATION
4 - 1
2 screws
Unit cover
UT-121
(Top view)
Notches
Tweezers
q Turn the power OFF, and remove the battery pack.
w Unscrew 2 screws to remove the unit cover.
e Insert the tweezers into the notches of the UT-121, and remove it as shown below.
r Screw 2 screws to assemble the unit cover.
2 screws
Unit cover
RECOMMENDATION:
Critical technique is necessary for the UT-121 uninstallation, therefore, we recommend you to uninstall it at your
dealer or service center.
fineline6