Icom IC-A110 Instruction Manual - Memory Names
9
4
MEMORY PROGRAMMING
■
Memory names
ï
Programming memory names
q
Select the memory channel to be programmed:
➥
Push [V/M] to select the Memory mode.
➥
Rotate [DIAL] to select the memory channel.
w
Hold down [MW](V/M) for 5 seconds to enter memory
name writing mode.
• The first digit blinks.
e
Repeatedly rotate [DIAL] to select the desired character.
• To erase a character, overwrite with a space (displayed as _).
• To move the cursor forwards or backwards, push [
Y
] or [
Z
].
• Hold down [SQL] for 2 seconds to erase all characters.
r
Hold down [MW](V/M) for 1 second to input the entered
name.
• The character stops blinking.
• Memory channels can be programmed with names of up to 7
characters in length.
• When no name is programmed, the display shows the operating
frequency.
NOTE: Push [PTT] to cancel the memory name programming.
• The following characters can be used in names:
➥
0 to 9, A to Z (capitals), (space), $, %, ’, (, ),
✽
, +, “ ,
”, –, /, , ?, @, [, \, ], ^, _ and `.
V/M
for 5 seconds
V/M
for 1 second
+
or
[EXAMPLE]: Setting the name to “TOWER 2”