Icom IC-A210 Service Manual - Section 1
1 - 1
SECTION 1
SPECIFICATIONS
¤
General
• Frequency range
: 118.000 to 136.975 MHz
161.650 to 163.275 MHz*
• Channel spacing
: 25 kHz
• Frequency stability
: ±5 ppm
• Operating temperature
: –20˚C to +55˚C
–4˚F to +131˚F
• Antenna impedance
: 50
Ω
• Number of memory channels : 10 memory channels
200 group channels
10 history channels
10 GPS channels
10 weather channels*
• Mode :
AM
(A3E)
• Power supply requirement : 13.80 V / 27.50 V DC
(negative ground)
• Dimensions :
160 (W) 34 (H) 271 (D) mm
(projections not incl.)
6
5
/
16
(W) 1
11
/
32
(H) 10
21
/
32
(D) in
• Weight
: approx 1.0 kg; 2.2 lb
*U.S.A. version only, receiving only.
¤
Transmitter
• Mode
: A3E
• Output power
: 8 W
(Carrier power)
• Spurious emissions
: –60 dBc
• Microphone impedance
: 600
Ω
• Modulation limiting
: 70% (Max 98%)
¤
Receiver
• Receive system
: Double conversion
superheterodyne
• Intermediate frequencies
: 1st
38.85 MHz
2nd
450 kHz
•Sensitivity
: (AM) Less than 2 µV (pd)
at 6 dB S/N
(FM) Less than 1.4 µV
at 12 dB SINAD*
• Selectivity
: 6 dB ±3 kHz
60 dB ±22 kHz
• Spurious response rejc.
: More than 74 dBµ
• Audio output power
: 5 W with a 4
Ω load (External
speaker)
60 mW with a 500
Ω load
(Headphone)
Measurements made in accordance with RTCA DO-186B for U.S.A. version.
All stated specifications are subject to change without notice or obligation.