Icom IC-A210E Instruction Manual - page 26
22
5
MENU MODE
n
MENU mode tems (Contnued)
D AM Squelch Level “SQL LEVEL”
Set the squelch level for AM mode operaton.
In order to receve sgnals properly, the squelch must be ad-
justed to the proper level.
• –010–010 : Settng AM squelch level from –10 to +10.
D Lock Mode “LOCK MODE”
Set the lock functon.
• OFF
: The lock functon s OFF.
• DIAL
: The lock functon apples to
[DIAL].
• PANEL
: The lock functon apples to buttons on the front panel.
D DualWatch Interval “DW INTERVAL”
Set the nterval tme whle operatng DualWatch.
• FAST
: Sets the nterval tme to 300 mllseconds.
• MID
: Sets the nterval tme to 600 mllseconds.
• SLOW
: Sets the nterval tme to 2 seconds.
D Priority Watch Interval “PRI. WATCH”
Set the actve frequency receve nterval tme whle recevng
the standby frequency.
• FAST
: Sets the nterval tme to 400 mllseconds.
• MID
: Sets the nterval tme to 800 mllseconds.
• SLOW
: Sets the nterval tme to 2 seconds.
D Memory Protection “MEM PROTECT”
Set the memory protecton to regular memory channels and
group memory channels.
Edtng the regular memory and group memory channels s
nhbted whle the protecton s ON.
• OFF
: The memory protecton s OFF.
• ON
: The memory protecton s ON.
D Group Memory Channel Display
“GRP MEMORY”
Set the dsplayng whether the label dsplays or not.
• CH
: Only the channel number s dsplayed.
• LABEL
: The label s also dsplayed.
D Microphone1 Gain “MIC1 GAIN”
Set the mcrophone1’s gan.
• –010–010 : Settng the mcrophone1’s gan from –10 to +10.
D Microphone2 Gain “MIC2 GAIN”
Set the mcrophone2’s gan.
• –010–010 : Settng the mcrophone2’s gan from –10 to +10.
NOTE:
The prorty watch nterval does not appear when
the “PRIORITY WATCH” s set to “OFF,” by the CS-A210.