Icom IC-F1000 series Instructions
The illustration is for the 10-key type transceivers.
* Depending on the transceiver version
There are three types of transceivers in the IC-F1000
and IC-F2000 series.
IC-F1000/F2000:
Non-display type (Basic type)
IC-F1000S/F2000S: Simple type (4-key type)
[LCD + 4 keys (P0–P3)]
IC-F1000T/F2000T: 10-key type
[LCD + 4 keys + 10-key Pad]
About the LED Indicator
D
• Lights red while transmitting.
• Lights green while receiving a signal, or when the
squelch is open.
• Lights or blinks orange when the matched 2-Tone or
5-Tone is received, depending on the presetting.
• You should charge the battery when the indicator
slowly blinks green.
• You must charge the battery when the indicator
blinks green fast.
About the Speaker microphone jack
D
CAUTION: Only when the jack cover or the optional
HM-168LWP, HS-94LWP, or HS-95LWP
is attached,
the transceiver meets IP67 requirements for dust-
tight and waterproof protection.
Thank you for purchasing the IC-F1000 series
vhf
transceivers
or IC-F2000 series
uhf
transceiv
-
ers
.
READ ALL INSTRUCTIONS carefully and com-
pletely before using the transceiver.
INSTRUCTIONS
[VOL]
[Emer]
Speaker
SPEAKER-
MICROPHONE
JACK
Microphone
FUNCTION DISPLAY
(LCD)*
[P0], [P1], [P2], [P3]*
(Dealer assignable)
10-KEY PAD*
[PTT]
LED INDICATOR
ANTENNA CONNECTOR
[UP]*
[Upper]*
(Dealer assignable)
[DOWN]*
[Lower]*
(Dealer assignable)
[ROTARY
SELECTOR]
PANEL DESCRIPTION
A-7122H-2EX-t
Printed in Japan
© 2014 Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
SUPPLIED ACCESSORIES
q
Battery pack*
w
Battery charger* (BC-213)
e
Belt clip (MB-133)
r
Power adapter* (for the battery charger)
t
Flexible antenna*
* Not supplied, or the shape is different, depending on
the transceiver version.
q
w
e
r
t
VHF TRANSCEIVERS
Iç-F2000 series
UHF TRANSCEIVERS
Iç-F1000 series
BATTERY PACKS
D
BP-278/BP-279/BP-280
•
battery
pack
Battery pack Voltage
Capacity
Battery life*
BP-278
7.2 V
1130 mAh
(minimum)
1190 mAh
(typical)
VHF 10
hours
UHF 10
hours
BP-279
7.2 V
1485 mAh
(minimum)
1570 mAh
(typical)
VHF 14
hours
UHF 14
hours
BP-280
7.2 V
2280 mAh
(minimum)
2400 mhA
(typical)
VHF
20 hours
UHF
20 hours
* When the power save function is turned ON, and the op-
erating periods are calculated under the following condi-
tions.
TX : RX : standby = 5 : 5 : 90
CHARGERS
D
BC-213
•
desktop
charger
+
BC-123S
ac
adapter
To rapid charge a single battery pack.
BC-214
•
multi
charger
+
BC-157S
ac
adapter
To rapid charge up to 6 battery packs.
DC CABLES
D
CP-23L
•
cigarette
lighter
cable
Use when charging the battery pack from a 12 V cig-
arette lighter socket. (Use with the BC-213)
OPC-656
•
dc
power
cable
Use with a 13.8 V power source instead of the power
adapter. (Use with the BC-214)
ANTENNAS
D
FA-SC25V/FA-SC55V/FA-SC62V/FA-SC63V
•
vhf
antennas
FA-SC25V: 136–150 MHz
FA-SC55V: 150–174 MHz
FA-SC62V: 150–160 MHz
FA-SC63V: 155–165 MHz
FA-SC26VS/FA-SC27VS/FA-SC56VS/FA-SC57VS
•
vhf
stubby
antennas
FA-SC26VS: 136–144 MHz
FA-SC27VS: 142–150 MHz
FA-SC56VS: 150–162 MHz
FA-SC57VS: 160–174 MHz
FA-SC61VC
•
vhf
cut
antenna
FA-SC61VC: 136–174 MHz
FA-SC25U/FA-SC57U/FA-SC72U/FA-SC73US
•
uhf
antennas
FA-SC25U: 400–430 MHz
FA-SC57U: 430–470 MHz
FA-SC72U: 470–520 MHz
FA-SC73US: 450–490 MHz
FA-SC26US
•
uhf
stubby
antenna
FA-SC26US: 400–450 MHz
FA-SC01U/FA-SC02U
•
uhf
antenna
FA-SC01U: 350–400 MHz
FA-SC02U: 330–380 MHz
FA-SC61UC
•
uhf
cut
antenna
FA-SC61UC: 380–520 MHz
OTHERS
D
MB-130
•
mobile
bracket
Mounts the BC-213
desktop
charger
on a variety of
places in a vehicle.
MB-133
•
belt
clip
HM-158LA/HM-159LA/HM-168LWP
•
speaker
microphone
Combination speaker-microphone that provides con-
venient operation while the transceiver is hanging on
your belt.
• Adjust the microphone gain before use.
HM-153LA/HM-166LA
•
earphone
-
microphone
Ideal for hands-free operation. Clip the HM-153LA or
HM-166LA (with integrated ptt
switch
) to your lapel
or breast pocket.
• Adjust the microphone gain before use.
HS-94/HS-95/HS-97
•
headset
+
VS-4LA
ptt
switch
cable
/
OPC-2004LA
adapter
cable
HS-94:
Ear-hook type
HS-95:
Neck-arm type
HS-97:
Throat microphone
VS-4LA:
To connect to headsets
OPC-2004LA: To connect to headsets for VOX oper-
ation
• Adjust the both microphone and VOX gain before use.
HS-94LWP/HS-95LWP
•
headset
HS-94LWP: Ear-hook type
HS-95LWP: Neck-arm type
• Adjust the both microphone and VOX gain before use.
OPTIONS
Some options may not be available in some countries. Ask
your dealer for details.
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver. Icom is
not responsible for the destruction or damage to an Icom
transceiver in the event the Icom transceiver is used with
equipment that is not manufactured or approved by Icom.
- 1 -
- 4 -
Icom, Icom Inc. and the Icom logo are registered trade-
marks of Icom Incorporated (Japan) in Japan, the Unit-
ed States, the United Kingdom, Germany, France, Spain,
Russia, and/or other countries.
All other products or brands are registered trademarks or
trademarks of their respective holders.