Icom ic-f1000d series Operating Manual - page 7
1
PANEL DESCRIPTION
1-5
DTMF AUTODIAL
Push to transmit the preset DTMF code.
CALL
Push to transmit a 2-Tone or 5-Tone in the operating
channel.
CALL A (CODE 1)/CALL B (CODE 2)
(only for the analog mode operation)
// only for the LMR model //
While in analog mode operation, push to transmit a
2-Tone code as station code, that is set in the channel
1 (Code A) or channel 2 (Code B).
CALL A (CODE 30)/CALL B (CODE 29)
(only for the analog mode operation)
// only for the PMR model //
While in analog mode operation, push to transmit a
5-Tone code as the station code, that is set in the
channel 30 (Code A) or channel 29 (Code B).
EMERGENCY
Hold down for the set time period* to turn ON the
Emergency function.
• The countdown for the Emergency call transmission
starts. After the countdown, an Emergency call is
automatically transmitted once, or repeatedly*.
During the first countdown, hold down for the set
time period* to cancel the Emergency function.
*Depending on the presetting. Ask your dealer for details.
SURVEILLANCE
Hold down for 1 second to turn ON the Surveillance
function.
Push to turn OFF the Surveillance function.
When this function is turned ON, the beep is not
heard and the LED indicator does not light, even when
a signal is received, or a key is pushed.
SIREN
Hold down for 1 second to emit a siren sound.
• This function can be used for situations other than an
Emergency alert, such as a security alarm.
Turn OFF the transceiver power to stop the siren
sound.
ENCRYPTION
(only for the digital mode operation)
Hold down for 1 second to turn ON the Encryption
function.
Push to turn OFF the Encryption function.
ANNOUNCE
Push to turn the Channel Announce function ON or
OFF.
When this function is turned ON, the transceiver
announces the position of [ROTARY SELECTOR].
CALL ALERT
(only for the digital mode operation)
Hold down for 1 second to transmit a Call Alert.
STATUS
(only for the digital mode operation)
Hold down for 1 second to transmit a Status call.