Icom IC-F310S Instruction Manual - page 2
i
R
WARNING! NEVER
connect the transceiver to an
AC outlet. This may pose a fire hazard or result in an electric
shock.
NEVER
connect the transceiver to a power source of more
than 16 V DC such as a 24 V battery. This connection will ruin
the transceiver.
NEVER
cut the DC power cable between the DC plug and
fuse holder. If an incorrect connection is made after cutting,
the transceiver might be damaged.
NEVER
place the transceiver where normal operation of
the vehicle may be hindered or where it could cause bodily
injury.
NEVER
allow children to touch the transceiver.
NEVER
expose the transceiver to rain, snow or any liquids.
USE
supplied microphone only. Other microphones have
different pin assignments and may damage the transceiver.
CAUTIONS
IMPORTANT
READ ALL INSTRUCTIONS
carefully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL —
This
instruction manual contains important operating instructions
for the IC-F300S/F400S series
VHF/UHF TRANSCEIVERS.
EXPLICIT DEFINITIONS
The following explicit definitions apply to this manual.
WORD
DEFINITION
R
WARNING
Personal injury, fire hazard or electric shock
may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
Versions of the IC-F310S/F320S/F410S/F420S which display
“CE” on the serial number seal, comply with the essential re-
quirements of the 89/336/EEC directive for Electromagnetic
Compatibility.
SmarTrunk II™ is a trademark of SmarTrunk Systems, Inc.