- DL manuals
- Icom
- Transceiver
- IC-F3210D Series
- Operating Manual
Icom IC-F3210D Series Operating Manual - page 16
14
2
IDAS OPERATION
Receiving a call (Continued)
■
Displaying the received call log
D
The transceiver stores a log of all calls in memory, if acti-
vated.
Up to 10 call logs can be stored, and the oldest call record
is erased when an 11th call is received. However, once the
transceiver is turned OFF, the all records are erased.
The received voice call (for individual), call alert, status call
and message logs are stored.
IC-F5220D/IC-F6220D series transceivers>
Push [Digital Button] to enter the application selection
q
mode.
• “VOICE” appears.
• To change the call type, hold down [Digital Button] for 1 second
while in the standby mode. After changing, the transceiver auto-
matically enters the application selection mode.
Select “CALL LOG” using [CH Up] or [CH Down].
w
Push [Digital Button] again to display the call log informa-
e
tion.
When a log information is displayed
For the IC-F3230D/F4230D series transceivers
For the IC-F5220D/F6220D series transceivers
Summary of IC-F3210D Series
Page 1
Operating guide operating guide for ic-f3210d/f4210d/f3230d/ f4230d/f5220d/f6220d series idas™ nxdn™ operation.
Page 2
I thank you for purchasing this icom transceiver. The idas™ nxdn™ functions are built into your ic-f3210d/ f4210d/f3230d/f4230d/f5220d/f6220d series transceiv- er. Read all instructions carefully and completely before using the transceiver. Save this operating guide — this operating guide contains i...
Page 3: Preparation
1 1 preparation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 programmable key functions ■ the programmable key functions can be assigned to the fol- lowing keys: ic-f3210d/f4210d series transceivers: [upper] and [lower] ic-f3230d/f4230d series transceivers: [p0], [p1], [p2], [p3], [side1], [side2], [side3...
Page 4
2 1 preparation programmable key functions (continued) ■ programmable key functions availability d programmable key functions analog digital reference ic-f3210d/ f4210d series ic-f3230d/ f4230d series ic-f5220d/ f6220d series ic-f3210d/ f4210d series ic-f3230d/ f4230d series ic-f5220d/ f6220d series...
Page 5
3 1 preparation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 programmable key functions analog digital reference ic-f3210d/ f4210d series ic-f3230d/ f4230d series ic-f5220d/ f6220d series ic-f3210d/ f4210d series ic-f3230d/ f4230d series ic-f5220d/ f6220d series encryption n/a n/a n/a ✔ ✔ ✔ p. 4 hook scan...
Page 6
4 1 preparation programmable key functions ■ programmable key functions d lone worker when the lone worker function is turned on, and no opera- tion occurs during the preprogrammed time period, the emer- gency function is automatically turned on. Hold down for 1 second to turn on the lone worker fun...
Page 7
5 1 preparation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 digital button n/a push to enter the application selection mode*. ➥ hold down for 1 second to toggle the call type between ➥ individual and talkgroup, and automatically enter the ap- plication selection mode. • push [ch up] or [ch down] to selec...
Page 8
6 1 preparation programmable key functions ■ programmable key functions (continued) d individual n/a push to set the call type to “individual,” and automatically ➥ enter the application selection mode*. If in the application selection mode, push to enter the indi- ➥ vidual id selection mode*. If “st...
Page 9
7 1 preparation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 site select n/a (this key is used for only multi-site trunk operation.) this key allows you to manually select a desired site without using a roaming scan. Q push [site select] to display the site select screen. W push [ch up] or [ch down] to se...
Page 10: Idas Operation
8 2 idas operation idas operation ■ the transceiver provides icom digital advanced system (idas) that meets the 6.25 khz emission mask requirements for narrow banding, and increases efficiency of channel al- location and use of spectrum using the nxdn common air interface. Idas conventional operatio...
Page 11: Receiving A Call
9 2 idas operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 receiving a call ■ receiving a voice call d when a voice call is received: q • mute is released. • either the calling station or talkgroup id name (or code) is displayed while receiving the signal, depending on the preset- ting.* 1 • when an ...
Page 12
10 2 idas operation receiving a call ■ receiving a call alert (continued) d hold down [ptt], then speak into the microphone. W release [ptt] to receive a response. E receiving a status message d when a status message is received: q • beeps sound. • the calling station or talkgroup id name (or code) ...
Page 13
11 2 idas operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 receiving a message d when a message is received: q • beeps sound. • the calling station id or talkgroup name (or code) and the mes- sage blink.* 1 • “ ” may appear or blink, depending on the presetting.* 1 • the led may blink orange once or...
Page 14
12 2 idas operation receiving a call (continued) ■ receiving a stun, kill or revive d if an individual call with a stun or kill command is received (ran code matching may not be necessary depending on the presetting), the transceiver will display “sorry” * 1 and you cannot receive * 2 or transmit. *...
Page 15
13 2 idas operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 receiving an emergency call d when an emergency call is received: q • beeps sound. • the emergency text and the calling station id name (or code) blink. • the state of the backlight depends on the backlight setting in the user set mode. When...
Page 16
14 2 idas operation receiving a call (continued) ■ displaying the received call log d the transceiver stores a log of all calls in memory, if acti- vated. Up to 10 call logs can be stored, and the oldest call record is erased when an 11th call is received. However, once the transceiver is turned off...
Page 17
15 2 idas operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 when no log information is available for the ic-f3230d/f4230d series transceivers for the ic-f5220d/f6220d series transceivers push [ch up] or [ch down] to select the desired log. R hold down [ptt] to send the voice call. T • a voice call ca...
Page 18: Transmitting A Call
16 2 idas operation transmitting a call ■ idas operation allows you to make a call to a specific station (individual call) or to a particular group (talkgroup call). Other digital mode transceivers on the channel will not receive a call that does not match their individual or talkgroup id and/or ran...
Page 19
17 2 idas operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 push [digital button] again to enter the destination id se- w lection mode. • the preprogrammed id name is displayed. • when the id name is not programmed, the id code is displayed. • the primary id can be preset to display first. • when you...
Page 20
18 2 idas operation transmitting a call (continued) ■ transmitting a call alert d call alert allows you to notify another user who may be away from the transceiver that you want to talk. Hold down q [callalert] to transmit the call alert to the specified station or talkgroup. • the led indicator bli...
Page 21
19 2 idas operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 push r [ch up] or [ch down] to select the desired id name (or id code). For the ic-f3230d/f4230d series transceivers for the ic-f5220d/f6220d series transceivers hold down t [ptt] to transmit the call alert to the selected station or talkgro...
Page 22
20 2 idas operation transmitting a call ■ transmitting a status message (continued) d ic-f5220d/ic-f6220d series transceivers> push [digital button] to enter the application selection q mode. • “voice” appears. • to change the call type, hold down [digital button] for 1 second while in the standby m...
Page 23
21 2 idas operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 push [digital button] again to enter the destination id se- t lection mode. • the preprogrammed id name is displayed. • when the id name is not programmed, the id code is displayed. • the primary id can be preset to display first. Push [ch u...
Page 24
22 2 idas operation transmitting a call (continued) ■ transmitting a message d ic-f5220d/ic-f6220d series transceivers> the transceiver has the ability to send a preprogrammed message. There are 10 messages that can be sent on a channel. Push [digital button] to enter the application selection q mod...
Page 25
23 2 idas operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 push [digital button] again to enter the destination id se- t lection mode. • the preprogrammed id name is displayed. • when the id name is not programmed, the id code is displayed. • the primary id can be preset to display first. Push [ch u...
Page 26
24 2 idas operation transmitting a call (continued) ■ direct message input d (10-key version only) push [digital button] to enter the application selection q mode. • “voice” appears. • to change the call type, hold down [digital button] for 1 second while in the standby mode. After changing, the tra...
Page 27
25 2 idas operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 transmitting an emergency call d when [emergency] is held down for a specified time period, a digital command emergency signal is transmitted once or repeatedly* on the emergency channel. When no emergency channel is specified, the signal is...
Page 28
26 2 idas operation transmitting a call (continued) ■ direct id input d (10-key version only) depending on the presetting, you can directly input the de- sired individual or talkgroup id. While in the individual or talkgroup id selection mode, q push the appropriate numeric key, [0] to [9], to input...
Page 29: Position Data Transmission
27 2 idas operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 position data transmission ■ when a gps receiver is connected to the transceiver, the lon- gitude and latitude position data can be automatically trans- mitted when: • a gps request status message is received • after sending a voice message ...
Page 30: Auto Ch Reserve Function
28 2 idas operation auto ch reserve function ■ if enabled, this feature is effective when a subscriber attempts to push [ptt] while the site is in an “all trunks busy” status, and/or is still “receiving a downlink” at the time the [ptt] is pushed. In the event of an “all trunks busy” condition, and/...
Page 31: Roaming Function
29 2 idas operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 roaming function ■ (multi-site trunking mode only) the multi-site trunking mode allows the transceiver to move to another site, according to the preprogrammed roaming list*, in order to find a site that has a higher quality signal, or provid...
Page 32
1-1-32 kamiminami, hirano-ku, osaka 547-0003, japan a-7084-1ex- w © 2013 icom inc..