- DL manuals
- Icom
- Transceiver
- IC-F5020 Series
- Instruction Manual
Icom IC-F5020 Series Instruction Manual
Summary of IC-F5020 Series
Page 1
Instruction manual vhf mobile transceivers if5020 series uhf mobile transceivers if6020 series.
Page 2
I icom, icom inc. And the icom logo are registered trademarks of icom incor- porated (japan) in the united states, the united kingdom, germany, france, spain, russia and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders. Important re...
Page 3
Ii precautions r warning! Never connect the transceiver to an ac outlet. This may pose a fire hazard or result in an electric shock. R warning! Never connect the transceiver to a power source of more than 16 v dc such as a 24 v battery. This connection will ruin the transceiver. R warning! Never cut...
Page 4
Iii table of contents important .......................................................................... I explicit definitions ....................................................... I fcc information ............................................................. I precautions .......................
Page 5: Front Panel
1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 q w t speaker function display (p. 2) r e ■ front panel q af volume control knob [vol] rotate the knob to adjust the desired audio output level. • minimum audio level is pre-set. (p. 11) w u./down keys [ch up]/[ch down] push to select an operating channel, et...
Page 6: Function Display
■ function display q transmit indicator appears while transmitting. W busy indicator appears while the channel is busy. E signal strength indicator indicates relative signal strength level as below. Weak receive signal level strong r low .Ower indicator appears when low output power is selected. T a...
Page 7: .Rogrammable Function Keys
3 1 panel description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ■ .Rogrammable function keys the following functions can be assigned to [u.] , [down] , [.0] , [.1] , [.2] and [.3] programmable function keys. Consult your icom dealer or system operator for details con- cerning your transceivers programm...
Page 8
4 1 panel description prio a/b keys ➥ push to select priority a or priority b channel. ➥ push and hold [prio a (rewrite)] or [prio b (rewrite)] for 1 sec. To rewrite the operating channel as the priority a or priority b channel. Mr-ch 1/2/3/4 keys push to select the memory channel 1 to 4 directly. M...
Page 9
5 1 panel description 1 wide/narrow key push to toggle the if bandwidth between wide and narrow. • the wide passband width can be selected from 25.0 or 20.0 khz using the cs-f3020/f5020 cloning software . (pmr operation only) ask your dealer for details. Dtmf autodial key ➥ push to enter the dtmf ch...
Page 10
6 1 panel description tx code channel select key ➥ push to enter the tx code channel selection mode. Then set the desired channel using [ch up]/[ch down]. (p. 9) ➥ while in the tx code channel selection mode, push and hold this key for 1 sec. To enter the tx code edit mode. Then set the desired digi...
Page 11: Basic O.Eration
7 2 basic o.Eration 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ■ turning power on q push [ ] to turn the power on. W if the transceiver is programmed for a start up password, input the digit codes as directed by your dealer. • the keys as below can be used for password input: the transceiver detects num...
Page 12: Call Procedure
8 2 basic operation ■ call procedure when your system employs tone signaling (excluding ctcss and dtcs), a call procedure may be necessary prior to voice transmission. The tone signalling employed may be a selective calling system which allows you to call specific station(s) only and prevents unwant...
Page 13
9 2 basic operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 d transmitting notes • transmit inhibit function the transceiver has several inhibit functions which restrict transmission under the following conditions: - the channel is in mute condition (‘inaudible’ condition; “ ” (audible indicator) doe...
Page 14
10 2 basic operation d tx code number edit (pmr operation only) if the transceiver has [tx code ch select] or [tx code enter] assigned to it, tx code contents can be edited within the allowable digits. Using [tx code ch select] key: q push [tx code ch select] to enter the tx code channel selection m...
Page 15: User Set Mode
11 2 basic operation 2 ■ user set mode user set mode can be accessed with ‘power on’ function. In this case, all set mode items are available. User set mode allows you to set seldom-changed settings and you can “customize” the transceiver operation to suit your preferences and operating style. Enter...
Page 16: Scrambler Function
12 2 basic operation ■ scrambler function the voice scrambler function provides private communica- tion between stations. All versions have a built-in frequency inversion type scrambler, moreover, the optional rolling or non-rolling type can be available. Q push [scrambler] to turn the scrambler fun...
Page 17: Mdc 1200 System Operation
13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ■ mdc 1200 system operation the mdc 1200 signaling system enhances your trans- ceiver’s capabilities. It allows ptt id*, emergency signaling, and receiving radio check. Also, the dispatcher can stun and revive transceivers on the system. An additional featur...
Page 18: Rear Panel Connection
14 e r antenna black red 12v battery solder crimp note: use the terminals as shown below for the cable connections. Q antenna connector connects to an antenna. Contact your dealer about antenna selec- tion and placement. Q w w external s.Eaker jack connect a 4–8 ø external speaker. E micro.Hone hang...
Page 19: Supplied Accessories
15 3 15 ■ supplied accessories microphone microphone hanger and screw set microphone hanger cable dc power cable flat washers spring washers bracket bolts mounting screws (m5×12) self-tapping screws (m5×20) nuts function name stickers* used for labelling the programmable function keys according to t...
Page 20: Antenna
16 3 connection and maintenance ■ antenna a key element in the performance of any communication systems is an antenna. Contact your dealer for more infor- mation regarding antennas and how to install them. ■ fuse replacement a fuse is installed in each fuse holder of the supplied dc power cable*. If...
Page 21: Safety Training Information
17 3 4 17 4 safety training information w arning your icom radio generates rf electromagnetic en- ergy during transmit mode. This radio is designed for and classified as “occupational use only”, meaning it must be used only during the course of employment by individuals aware of the haz- ards, and t...
Page 22
18 4 safety training information cau tion to ensure that your exposure to rf electromag- netic energy is within the fcc allowable limits for occupational use, always adhere to the following guidelines: • do not operate the radio without a proper antenna attached, as this may damage the radio and may...
Page 23
Memo 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16.
Page 24
1-1-32 kamiminami, hirano-ku, osaka 547-0003, japan a-6730d-1ex- q printed in japan © 2009 icom inc. Printed on recycled paper with soy ink..