- DL manuals
- Icom
- Transceiver
- IC-F5122D
- Operating Manual
Icom IC-F5122D Operating Manual
Summary of IC-F5122D
Page 1
Operating guide operating guide for ic-f5122d ic-f6122d idas™ dpmr™ operation.
Page 2
I thank you for purchasing this icom transceiver. The digital private mobile radio (dpmr) system functions are built into your ic-f5122d/f6122d transceiver. Read all instructions carefully and completely before using the transceiver. Save this operating guide — this guide con- tains important oper a...
Page 3
Table of contents ii important .......................................................................... I table of contents ........................................................ Ii 1 preparation............................................................1–2 ■ programmable function keys ...........
Page 4: Preparation
1 1 preparation ■ programmable function keys the following functions can be assigned to [up] , [down] , [p0] , [p1] , [p2] and [p3] programmable function keys. Consult your icom dealer or system operator for details con- cerning your transceiver’s programming. If the programmable function names are ...
Page 5
D dpmr operations the following key functions are useful for the dpmr opera- tion. Status up, status down ➥ push to select a status message. ➥ when the automatic scroll function is activated, push to cancel it, if desired. ➥ when an sdm that includes more than 8 characters is dis- played, push to ma...
Page 6: Dpmr Operation
3 2 dpmr operation 3 ■ dpmr operation the ic-f5122d and ic-f6122d provide digital private mobile radio (dpmr) operation that meets the 6.25 khz bandwidth requirements for narrow band operation. This increases ef- ficiency of channel allocation and use of the spectrum. ■ receiving a call d receiving ...
Page 7
4 3 dpmr operation 2 16 15 14 13 12 11 10 9 8 7 6 5 4 2 1 4 d receiving a status message q when a status message is received: • beeps sound. • the calling station or talkgroup id name (or code) and the sta- tus message alternately appear. W to clear the id and message display, push [ptt] , turn off ...
Page 8
5 2 dpmr operation d receiving a stun, kill or revive if an individual call with a stun or kill command is received, the transceiver will display “sorry” and you can not receive* or transmit. * depending on the received stun command setting. Revive signals can always be received. ➥ when a stun comma...
Page 9
2 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 6 d displaying the received call log if activated, the log stores received calls into the transceiver’s memory. Up to 10 calls can be stored, and the oldest call record is erased when an 11th call is received. However, once the trans- ceiver is...
Page 10: Transmitting A Call
7 2 dpmr operation ■ transmitting a call dpmr operation allows you to make a call to a specific station (individual call) or to a specific group (talkgroup call). Other digital mode transceivers on the channel will not hear a call that does not match their individual or talkgroup id. D transmitting ...
Page 11
2 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 8 d transmitting an sdm you can send a preprogrammed sdm to an individual sta- tion or to group stations. The transceiver has 10 memories to store messages. Q push [dpmr button] to enter the id selection mode. • the preprogrammed id is displaye...
Page 12: Position Data Transmission
9 2 dpmr operation important: setting an individual emergency channel is recommended for dependable emergency call operation. Note: when the digital request ack function is activated, the transceiver transmits an emergency call with a request to send back an acknowledgment. ■ position data transmiss...
Page 13: Horn Output
10 2 dpmr operaration 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ■ horn output the automatic honking function can be used when a horn is connected to the transceiver through the optional acc cable opc-1939 (d-sub 15-pin) or opc-2078 (d-sub 25-pin). When a status message is received, the transceiver soun...
Page 14
1-1-32 kamiminami, hirano-ku, osaka 547-0003, japan a-7089-1eu © 2013 icom inc..