Icom IC-F62D Instructions
INSTRUCTIONS
A7397H-1EX-2
Printed in Japan
© 2017–2018 Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
VHF/UHF DIGITAL TRANSCEIVERS
- 1 -
Thank you for choosing this Icom product.
READ ALL INSTRUCTIONS carefully and completely
before using this product.
This instruction sheet includes some functions that are
usable only when they are preset by your dealer. The
transceiver may have other functions and operations that
are not described in this instruction sheet. Ask your dealer
for preset function details.
IMPORTANT
Battery pack
Belt clip
Connector cover
(with a screw)
SUPPLIED ACCESSORIES
D
About the Status indicator
• Lights white, then blinks red, yellow, and green when
turning ON the transceiver.
•Lights red while transmitting.
• Lights green while receiving a signal, or when the squelch
is open.
D
About the Multi-connector
Connects to an optional speaker microphone or headset.
CAUTION: DO NOT use the transceiver without the
connector cover or the optional microphone attached.
The transceiver meets IP67 requirements for dust-tight and
waterproof protection only when the connector cover or the
optional microphone is attached.
D
About the Software key functions
NOTE: Your dealers can assign the Software key
functions to the keys.
PANEL DESCRIPTION
D
BATTERY PACKS
• BP-290
l
i-ion
battery
pack
Voltage:
7.2 V
Capacity: 1910 mAh (minimum), 2010 mAh (typical)
Battery life: Approximately 13 hours
• BP-291
battery
case
Battery case for AA alkaline batteries.
• BP-294
l
i-ion
battery
pack
Voltage:
7.2 V
Capacity: 3050 mAh (minimum), 3150 mAh (typical)
Battery life: Approximately 18.5 hours
D
CHARGERS
• BC-226
desktop
charger
+ BC-228
ac
adapter
For rapidly charging battery packs.
Charging time: Approximately 2.7 hours
L
A power adapter may be supplied, depending on the charger’s
version.
• BC-214
multi
-
charger
+ BC-157S
ac
adapter
,
OPC-656
dc
power
cable
For rapidly charging of up to 6 battery packs simultaneously.
Charging time: Approximately 2.8 hours
L
The AD-132N
charger
adapter
may be needed, depending
on the charger's version.
L
The BC-157S
ac
adapter
or OPC-656
dc
power
cable
must
be purchased separately.
•BC-219N
desktop
charger
+
BC-123S
ac
adapter
For rapidly charging of battery packs.
Charging time: Approximately 2.5 hours for the BP-290
L
A power adapter may be supplied, depending on the charger’s
version.
• BC-225
intelligent
desktop
charger
+ BC-123S
ac
adapter
+ RS-BC225
reader
software
For rapidly charging battery packs.
You can check the charging status using the RS-BC225.
Charging time: Approximately 2.5 hours for the BP-290
L
A power adapter may be supplied, depending on the charger’s
version.
L
An USB (Micro-B) cable is required to connect the BC-225 and
a PC with the RS-BC225 installed.
D
DC CABLES
•CP-23L
cigarette
lighter
cable
Used when charging battery packs through a 12 V
cigarette lighter socket. For use with the BC-219N.
•OPC-515L, OPC-656
dc
power
cables
Used when charging battery packs using a 13.8 V DC
power source instead of the power adapter.
OPC-515L: For the BC-219N
OPC-656: For the BC-214
D
ANTENNAS
• FA-SC26VS, FA-SC27VS, FA-SC56VS, FA-SC57VS
FA-SC26US, FA-SC73US
stubby
antennas
Shorter VHF or UHF antennas.
FA-SC26VS: 136 ~ 144 MHz FA-SC27VS: 142 ~ 150 MHz
FA-SC56VS: 150 ~ 162 MHz FA-SC57VS: 160 ~ 174 MHz
FA-SC26US: 400 ~ 450 MHz FA-SC73US: 450 ~ 490 MHz
• FA-SC25V, FA-SC28V, FA-SC29V,
FA-SC01U, FA-SC25U, FA-SC57U, FA-SC72U
flexible
antennas
VHF or UHF antennas.
FA-SC25V: 136 ~ 150 MHz FA-SC28V: 148 ~ 162 MHz
FA-SC29V: 160 ~ 174 MHz FA-SC01U: 350 ~ 400 MHz
FA-SC25U: 400 ~ 430 MHz FA-SC57U: 430 ~ 470 MHz
FA-SC72U: 470 ~ 520 MHz
•
FA-SC61VC, FA-SC61UC
cut
antennas
•
FA-SC62V, FA-SC63V
high
gain
antennas
D
BELT CLIPS and BELT HANGERS
•
MB-136, MBB-3
belt
clip
•MB-96F, MB-96FL, MB-96N
belt
hangers
D
OTHERS
•HM-222
speaker
microphone
With an Emergency key.
The HM-222 meets IP68 requirements for waterproof
protection.
•HM-233GP
gps
speaker
microphone
The microphone with high-performance GPS receiver.
• HM-163MC
tiepin
type
microphone
+ EH-15B
earphone
,
SP-26
tube
earphone
,
SP-28
ear
hook
type
earphone
•SP-32
tube
type
earphone
adapter
For use with EH-15B.
•
SP-27
tube
earphone
,
SP-29
ear
hook
type
earphone
,
SP-40
earphone
+ AD-135
earphone
adapter
AD-135: Used To connect an earphone to the transceiver’s
multi-connector.
•
AD-118
acc
adapter
To connect an accessory. See the AD-118 instruction
sheet for details on recommended accessories.
CAUTION: The AD-118 does not have waterproof
protection. When it is connected,
NEVER expose the
adaptor and the transceiver to rain, snow or any liquids.
•
LC-187, LC-188*
carrying
case
For use with the BP-290.
•
LC-190*
carrying
case
For use with the BP-294.
* Remove the carrying case from the transceiver before
charging.
• VS-5MC*
ptt
switch
cable
+
HS-94, HS-95, HS-97
headset
VS-5MC: Used to connect a headset to a transceiver.
HS-94: Ear-hook type
HS-95: Neck-arm type
HS-97: Throat microphone
* Non-waterproof.
•VS-3 Bluetooth
®
headset
The Bluetooth
headset with a [PTT] switch.
•About the third party Bluetooth headsets:
Icom has checked the PTT operation with some 3M Peltor
headsets such as the WS Headset XP, WS ProTac XP and
WS Alert XP. (Compatibility not guaranteed.)
OPTIONS
Some options may not be available in some countries.
Ask your dealer for details.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France,
Spain, Russia, Australia, New Zealand, and/or other countries.
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Icom Inc. is under license. Other
trademarks and trade names are those of their respective owners.
All other products or brands are registered trademarks or trademarks of their respective holders.
- 4 -
Iç-F52D
Iç-F62D
[Rotary Encoder]
Antenna
Connector
[Emer]*
[PTT]
[Back]*
[OK]*
[F1]*
[F2]*
Speaker
[P1 (Down)]*
[P2 (Up)]*
[VOL]
Status
indicator
Micro-
phone
Multi-
connector
*Dealer assignable
NOTE:
• Some accessories are not supplied, or the shape is
different, depending on the transceiver version.
•Confirmbothbatteryslidinglocksarelockedinplace,
when attaching the battery to the transceiver. Both sliding
locks make a ‘click’ sound when locked.