1. DL manuals
  2. Icom
  3. Transceiver
  4. IC-F8100
  5. Instruction Manual

Icom IC-F8100 Instruction Manual

Manual is about: For ALE Enhanced versions

Summary of IC-F8100

  • Page 1

    2001 new hf transceiver if8100 instruction manual.

  • Page 2: D Features

    I 2001 new 2001 new foreword thank you for purchasing this icom product. The ic- f8100 hf transceiver is designed and built with icom’s state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. We appreciate you making the ...

  • Page 3

    2001 new ii precautions r danger high rf voltage! Never attach an antenna or internal antenna connector during trans- mission. This may result in an electrical shock or burn. R warning! Never operate the transceiver with a headset or other audio accessories at high volume levels. Hearing experts adv...

  • Page 4: Panel Description

    2001 new 2001 new 1 1 panel description 2001 new q volume keys [ +]/[ –](p. 9) adjusts the audio output level. W emergency key [ ] note: while in the vfo mode, the emergency key cannot be used. ➥ push to enter the emergency channel list. • push again to return to the normal operating screen. ➥ hold ...

  • Page 5: Quic

    2001 new 2 1 panel description 2001 new 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence !0 microphone connector [mic] connects only the microphone supplied with the transceiver. Note: never connect the hm-192 or any other microphone here. Y u t r q w e i front view q mic (microphone inpu...

  • Page 6

    3 1 panel description 2001 new 2001 new vfo key [vfo] push to turn the vfo mode on or off. Note: the vfo mode operation can be inhibited in the admin menu. (p. 39) gps key [gps] when a gps receiver is connected through the optional ad-119 junction box or opc- 2205 shielded control cable and valid da...

  • Page 7: Quic

    2001 new 4 1 panel description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence q dc power connector [dc] accepts 13.8 v dc through a dc power cable. W fan connector [fan] connects the optional cfu-f8100 cooling fan. Note: attach the protect plug when the optional cooling fan is not used....

  • Page 8: Lcd Screen

    5 1 panel description 2001 new 2001 new q receive/transmit icon ➥ “ rx” appears when signals are received or the squelch is open. ➥ “ tx” appears during transmit. W s-meter/tx meters ➥ displays the receive signal strength. ➥ displays the transmit output power. Mic gain can also be displayed when the...

  • Page 9: Quic

    2001 new 6 1 panel description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence !1 call icon displays the call type icons for selcall. • the “ ” icon appears when the selective call is se- lected on the selcall address display. • the “ ” icon appears when the phone call is selected on the...

  • Page 10: Ad-119 Optional Junction Box

    2001 new 7 1 panel description 2001 new q data jack [data] connects to a pc via an rs-232c cable (d-sub 9-pin) for remote control in rs-232c format. W gps connector [gps] input position and utc data in nmea0183 ver. 2.0 or 3.01 formats, such as from a gps receiver to automatically set your position ...

  • Page 11: Basic Operation

    2 8 basic operation 2001 new 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence ➥ push [ ] to turn on the power. • built-in test is displayed. The bit display can be turned off in advance menu. • hold down [ ] for 2 seconds to turn off the power. ■ power on q push [§] one or more times to s...

  • Page 12: Squelch Function

    9 2 basic operation 2001 new 2001 new the squelch function detects signals with voice com- ponents and squelches (mutes) unwanted signals. This provides quiet stand-by. When you need to receive weak signals, the squelch can be turned off. ➥ push [mute]( m ) one or more times to select a squelch type...

  • Page 13: Quic

    2001 new 10 2 basic operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence the following modes are selectable in the ic-f8100: lsb, usb, cw, am, d1,* d2* and d3* modes. * when the “modem” setting in the admin menu is set to “off,” “rtty” can be selected instead. (p. 40) the d1, d2 or ...

  • Page 14: Vfo Operation

    2001 new 2001 new 11 2 basic operation 2001 new in the vfo mode, you can set a desired operating fre- quency, operating mode or split frequency function. Note: • the vfo mode operation can be inhibited in the admin menu. • while in the vfo mode, the selcall, ale features or the emergency key cannot ...

  • Page 15: Receive And Transmit

    2001 new 3 12 receive and transmit 2001 new 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence ■ basic voice transmit/receive q first, check the following. ➥ microphone and external speaker are con- nected. ➥ no mute icon “s,” “l” or “v” appears. • if “s,” “l” or “v” appears, push [mute] ( ...

  • Page 16: Functions For Transmit

    ■ functions for transmit ï transmit power selection the transceiver has three output power levels, high, mid and low. High power allows longer distance communications and low power reduces power con- sumption. [default] [ ] [ ] / q hold down [menu](home) for 1 second to enter the menu screen. W push...

  • Page 17

    14 3 receive and transmit 3 ï checking the mic level the transceiver has a mic level meter. You can check the mic level before or after adjusting the microphone gain. [default] [ ] [ ] / q hold down [menu](home) for 1 second to enter the menu screen. W push [r] or [s] to select the “admin menu,” and...

  • Page 18: Functions For Receive

    15 3 receive and transmit 2001 new 2001 new ■ functions for receive ï clarifier function the clarifier function compensates for off-frequency sta- tions. The function shifts the receive frequency up to ±200 hz without moving the transmit frequency. • setting [ ] / q hold down [menu](home) for 1 seco...

  • Page 19

    3 16 receive and transmit 3 2001 new ï preamp and attenuator the preamp amplifies received signals in the front end circuit to improve the s/n ratio and sensitivity. Turn on this function to better receive weak signals. The attenuator prevents strong undesired signals near the desired frequency or n...

  • Page 20

    17 3 receive and transmit 2001 new 2001 new ■ functions for receive (continued) d agc function the agc (auto gain control) controls receiver gain to produce a constant audio output level even when the received signal strength is varied by fading, and so on. The transceiver has two agc characteristic...

  • Page 21: Quic

    2001 new 18 3 receive and transmit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence ï clear talk function the clear talk function enhances desired signals in the presence of noise by using the dsp circuit. Clear talk function off clear talk function on desired signal (cw) noise components...

  • Page 22: Selcall/ale Operation

    4 19 selcall/ale operation 2001 new ■ selcall or ale selcall uses a 4 or 6-digit id address and allows you to make an individual or group call. The ale (automatic link establishment) is a system which automatically se- lects an available frequency and establishes a commu- nication link. The ic-f8100...

  • Page 23

    20 4 selcall/ale operation 4 the selcall allows you to make individual or group calls. Each transceiver is assigned an individual id (identification) and can be called using this id. • preparation for selective call sending a channel test call on several selcall chan- nels, and check the propagation...

  • Page 24

    21 4 selcall/ale operation 2001 new 2001 new allows you to make phone calls through a telephone interconnect service provider. • preparation for phone call sending a channel test call on several phone call channels, and check the propagation on each channel to select the channel of good signal quali...

  • Page 25

    22 4 selcall/ale operation 4 2001 new i push [ ] to enter the channel menu, and then push [ t ](§) or [ u ](§§§) to select the desired operat- ing channel. • push [home] to return to selcall menu. O push [ ] to transmit the phone call. The call is stored in the call out memory. • while calling, push...

  • Page 26

    23 4 selcall/ale operation 2001 new 2001 new the message call allows you to exchange text mes- sages of up to 64 character,* with the intended id sta- tion, also you to leave a message at the station. * 64 character for icom selcall system; 32 character for open selcall system. • preparation for mes...

  • Page 27

    24 4 selcall/ale operation 4 2001 new • receiving message call when a transceiver receives a message call with your individual id, it automatically responds by transmitting. The received message is stored in the call in mem- ory. Q after receiving a message call, and push any key to enter the call i...

  • Page 28

    25 4 selcall/ale operation 2001 new 2001 new the send position call allows you to send your own position/time information to the intended id station. • preparation for send position call sending a channel test call on several selcall chan- nels, and check the propagation on each channel to select th...

  • Page 29

    26 4 selcall/ale operation 4 2001 new the get position call allows you to request the in- tended id station to send position information. • preparation for get position call sending a channel test call on several selcall chan- nels, and check the propagation on each channel to select the channel of ...

  • Page 30

    27 4 selcall/ale operation 2001 new 2001 new the get status call requests to send radio status infor- mation including power supply voltage, signal strength, output power, vswr, and so on. • preparation for get status call sending a channel test call on several selcall chan- nels, and check the prop...

  • Page 31

    28 4 selcall/ale operation 4 2001 new the rfds (royal flying doctor service) emergency call uses a 2-tone signal for an emergency call. • sending rfds emergency call q on the memory channel display, push [ ] to enter the call select menu. W push [t](§) or [u](§§§) to select the call to “sel- call,” ...

  • Page 32

    29 4 selcall/ale operation 2001 new 2001 new the emergency call allows you to broadcast an emer- gency signal with own position information. • sending emergency call q on the memory channel display, push [ ] to enter the call select menu . W push [ t ](§) or [ u ](§§§) to select the call to “sel- ca...

  • Page 33

    30 4 selcall/ale operation 4 2001 new the channel test call allows the user determine the signal quality between your transceiver and specific transceiver before an individual/group call. The chan- nel test call is also used for checking the channel be- fore sending phone call. • sending channel tes...

  • Page 34

    31 4 selcall/ale operation 2001 new 2001 new automatically establish a communication link by using the ale table. • sending an individual call q on the memory channel display, push [ ] to enter the call select menu . W push [ t ](§) or [ u ](§§§) to select the call to “ale,” then push [ ] to enter t...

  • Page 35: Quic

    2001 new 32 4 selcall/ale operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence ï ale sounding automatically sends a sounding signal at a certain interval (0.5–16 hours) to check the propagation and stores the data in a table. Manual soundings can also be made. • manual sounding q on...

  • Page 36

    33 4 selcall/ale operation 2001 new 2001 new 2001 new ï ale amd the ale amd (automatic message display) sends and receives test messages of up to a 90 character. Q on the memory channel display, push [ ] to enter the call select menu . W push [ t ](§) or [ u ](§§§) to select ale as the call to “ale,...

  • Page 37: Menu Screen

    2001 new 5 34 menu screen 2001 new 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence d entering utc offset setting ■ edit menu d entering clock setting q hold down [menu](home) for 1 second to enter the menu screen. W push [r] one or more times to select the edit menu, and then push [4]. E...

  • Page 38: User Menu

    35 5 menu screen 2001 new 2001 new lcd contrast adjust the contrast of the lcd between 0 and 10 in 1 digit steps. (default: 6) d user menu items lcd dimmer adjusts the backlight brightness of the lcd between 0 (dark) and 10 (bright) in 1 digit steps. (default: 5) 1 to 10 : lights during transceiver ...

  • Page 39: Quic

    2001 new 36 5 menu screen 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence squelch level adjust the squelch threshold level between 0 and 50, in 1 digit steps. (default: 10) when the s-meter squelch is activated, only signals stronger than this set level are received. Noise blanker turns ...

  • Page 40

    37 5 menu screen 2001 new 2001 new rf power set the transmit output power to low, mid or high. (default: high) speech processor* this item appears when “advanced user menu” in the admin menu is set to on. Turns the speech processor function on or off. (default: off) processor level* this item appear...

  • Page 41: Admin Menu

    38 5 menu screen 5 2001 new ■ admin menu the admin menu is used for programming infrequently changed values, settings or functions. D entering the administrator mode when first entering the administrator mode, a login pass- word may be required, depending on the preprogramming. Q turn off the transc...

  • Page 42

    39 5 menu screen 2001 new 2001 new d admin menu items tuner type select the connected icom antenna tuner from at-140 or at230 antenna tuner or off. (default: off) tx timeout set the time-out timer function time to 1, 3, 5 or 10 minutes, or off. If a continuous transmission exceeds the selected time ...

  • Page 43

    2001 new 40 5 menu screen 5 fsk shift several shift frequencies are used for fsk operation. Select an fsk shift frequency for almost any fsk sys- tem, of 170 hz, 200 hz, 425 hz or 850 hz. (default: 170 hz) fsk polarity normal and reverse fsk polarities are selectable. Select normal or reverse polari...

  • Page 44

    41 5 menu screen 2001 new 2001 new shift frequency set the frequency shift for the data mode to 1800hz usb, 1500hz usb, 1800 hz lsb or 1500hz lsb. (default: 1800hz usb) scan set the scan type to ale, selcall, voice, call, all memory or off. (default: off) scan resume set the scan resume on or off. (...

  • Page 45

    42 5 menu screen 5 2001 new get status mode select the activation of status request call to both re- ception and transmission, reception only, transmis- sion only or disable. (default: rx&tx) message mode select the activation of message call to both recep- tion and transmission, reception only, tra...

  • Page 46

    43 5 menu screen 2001 new 2001 new emergency mode select the activation of emergency call to both recep- tion and transmission, reception only, transmission only or disable. (default: rx&tx) ale mode select the activation of ale to both reception and transmission, reception only, transmission only o...

  • Page 47: Quic

    2001 new 44 5 menu screen 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence ale ber threshold set the bit error ratio (ber) threshold level to be- tween 0 and 48 bit for ale communication quality. (default: 12) one unit consists of 48 bits of data. Ale golay threshold set the golay thresho...

  • Page 48

    45 5 menu screen 2001 new 2001 new ale lqa average set the adopting number of lqa data for averaging to between 1 and 8. (default: 8) ale lqa request set the lqa request function to on or off. (default: on) when on is set, transceiver requests the called sta- tion to send lqa data with the ale answe...

  • Page 49: Quic

    2001 new 46 5 menu screen 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence ci-v baudrate set the data transfer rate to 300, 1200, 4800, 9600, 19200 bps or auto. (default: auto) af line select when the optional ad-119 is connected, select the input for the modulation signals from an extern...

  • Page 50: Connection and Installation

    6 47 connection and installation 2001 new 2001 new 2001 new ■ supplied accessories e r t y q w u i o !0 e r t y q w u i d one package type the following accessories are supplied with ic-f8100 one package type. Q microphone (hm-193) ........................................... 1 w external speaker (sp...

  • Page 51: Quic

    2001 new 48 6 connection and installation 2001 new 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence e r t o y q w u i d remote control microphone type the following accessories are supplied with ic-f8100 remote control microphone type. Q remote control microphone (hm-192) ...................

  • Page 52: Connections

    49 6 connection and installation 2001 new 2001 new ■ connections pc to [acc1] to [acc2] to [usb] to a usb port to a 13.8 v dc power source to [acc1] to [acc2] opc-2126 opc-2127 transceiver usb cable (purchase separately) ad-119 sp-25 + red _ black 12v battery 12v battery crimp terminal r warning! Ne...

  • Page 53: Quic

    2001 new 50 6 connection and installation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence at-140 opc-2205 ground ic-f8100 main unit to a 13.8 v dc power source to a gps receiver to [acc2] to [acc1] opc-2142 (10 m): 4 pin ground (see page 51) at-140 at230 ground (see page 51) ground (see ...

  • Page 54: Ground Connection

    51 6 connection and installation 2001 new 2001 new ■ ground connection the transceiver and antenna tuner must have an adequate rf ground connection. Otherwise, the overall efficiency of the transceiver and antenna tuner installation will be reduced. Electrolysis, electri- cal shocks and interference...

  • Page 55: Antenna

    2001 new 52 6 connection and installation 6 ■ antenna most stations operate with a whip or long wire (insu- lated back stay) antenna. However, these antennas cannot be connected directly to the transceiver since their impedance may not match with the transceiver antenna connector. R danger high volt...

  • Page 56

    53 6 connection and installation 2001 new 2001 new the rmk-6 allows you to install the ic-f8100’s front panel separately from the main unit for added installa- tion convenience and operation. Use either the optional opc-607, opc-608, opc-609 or opc726 separation cable with the rmk-6. The rmk-6 is sa...

  • Page 57: Quic

    2001 new 54 6 connection and installation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence t unscrew the 4 rear plate screws, then remove the rear plates from both the front panel and main unit attachments. Rear plate *this illustration shows the descrip- tion for the main unit attachment...

  • Page 58

    55 6 connection and installation 2001 new 2001 new the hm-192 allows you to remotely control the trans- ceiver by using the microphone. Use either the optional opc-607, opc-608, opc-609 or opc-726 separa - tion cable . The hm-192 is same as the one supplied in the re- mote control microphone type. D...

  • Page 59: Mounting

    2001 new 56 6 connection and installation 6 ■ mounting d mounting location select a location which can support the weight of the transceiver and does not interfere with driving. We recommend the locations shown in the diagram below. Never place the main unit or remote controller where nor- mal opera...

  • Page 60

    57 6 connection and installation 2001 new 2001 new q attach the mounting plates, and tighten the 2 sup- plied m5 × 8 screws on each side. W put the mounting bracket on the board, and then tighten the 4 supplied screws (m5 × 20). E attach the main unit to the mounting bracket as shown below. Not supp...

  • Page 61: Fuse Replacement

    58 6 connection and installation 2001 new 6 ■ fuse replacement if a fuse blows, or the transceiver stops functioning, find the source of the problem, and repair it. Then re- place the damaged fuse with a new, adequately rated fuse. Rwarning! Turn off the power and discon- nect the dc power cable fro...

  • Page 62

    59 6 connection and installation 2001 new ■ connector information for ad-119 data pin pin name description 1 5 6 9 1 nc no connection 2 txd outputs transmit data. 3 rxd input terminal for receive data. 4 dtr outputs data terminal ready signal. 5 gnd connect to the ground. 6 nc no connection 7 cts in...

  • Page 63: Quic

    60 6 connection and installation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence ext. Modem pin pin name description specification 1 8 1 txd outputs terminal for receive data. Rs-232c 2 rxd input terminal for transmit data. Rs-232c 3 gnd connect to the ground. — 4 ptt ptt input terminal....

  • Page 64: Specifications

    7 61 specifications 2001 new d general • frequency coverage : (unit: mhz) receive 0.5–29.9999 transmit 1.6–29.9999 • type of emission : aus versions j3e (usb), a3e (am) rx only other versions j3e (usb/lsb), a1a (cw), a3e (am), f1b (fsk) • no. Of memory ch. : 500 channels (maximum) • usable temp. Ran...

  • Page 65: Options

    8 62 options 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence at-140 automatic antenna tuner antenna and control cable receptacles for easy installation and tuner through function are available. Opc-2142 shielded control cable the shielded control cable protects the transceiver from rf fe...

  • Page 66

    63 2001 new 2001 new memo.

  • Page 67: Quic

    2001 new 64 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence memo.

  • Page 68

    65 2001 new 2001 new memo.

  • Page 69: Quic

    2001 new 66 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence memo.

  • Page 70

    67 2001 new 2001 new memo.

  • Page 71: Quic

    2001 new 68 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 quic k ref erence memo.

  • Page 72

    1-1-32 kamiminami, hirano-ku, osaka 547-0003, japan 2001 new a-6916h-1ex-q printed in japan © 2011–2012 icom inc. Printed on recycled paper with soy ink..