Icom iF610 Instruction Manual - page 16
11
2
OPERATION
D
D
Emergency Call
• Enter
✱
9
✱
plus an individual code or a group code and then
push [#]. The emergency call will be started.
‘Selectable Emergency Function; Disable
*
’
➥
Enter
✱
9, then push [#]. The pre-programmed
‘Emergency Number’ used for the emergency call.
‘Selectable Emergency Function; Enable
*
’
➥
Enter
✱
9, then push [#]. The current ‘Dial Number’ select-
ed via [
]/[
] used for the emergency call.
- If the system is busy (no channel is available), a channel
is forcibly made available allowing you to establish the
communication.
‘
Selectable Emergency Function’
can be set with the
cloning software (p. 28).
D
D
System Wide Call
• Entering
✱
1981# will allow you to make a priority voice call.
• Entering
✱
1982# will allow you to make a voice call.
• Entering
✱
1987# will allow you to make a standard voice
call.
➥
Each of the above calls is used to call all the mobile sta-
tions that are waiting on the system.
D
D
PSTN Call
Enter 0 plus a telephone number (8 digits or more) and then
push [#]. The PSTN call will be started.
D
D
PABX Call
Enter 0 plus a telephone number (5 to 7 digits) and then push
[#]. The PABX call will be started.
D
D
Divert Own Call
• Enter
✱
41n
✱
plus the individual code of the station you want
to divert your own call to, and then push [#].
This will allow you to divert your own call to the specified
station.
➥
In the place of ‘n’, enter 1 for voice, 0 for data, or nothing
for both voice and data.
• Enter #41n
✱
, then push [#] to cancel the diversion.Or enter
#45n# to cancel the above diversion on the station you want
to divert your own call to.
D
D
Divert 3rd Party Call
• Enter
✱
44n
✱
plus Station B’s individual code plus
✱
plus
Station A’s individual code (destination), and then push [#].
Station B’s call will be diverted to Station A.
➥
In the place of ‘n’, enter 1 for voice, 0 for data, or nothing
for both voice and data.
• Enter #44n
✱
plus station B’s individual code, and then push
[#] to cancel this diverting.
D
D
Cancellation of Divert
• Enter #41n and then push [#]. This will allow you to cancel
the Divert Own call.
IC-F610_F620_MPT_1.qxd 05.8.22 6:07 PM Page 11 (1,1)