Icom IP1000C User Manual

PRECAUTIONS

■

 For the AC adapter

R WARNING! NEVER use the AC adapter with any de-

vice other than the IP1000C. This may result in an electrical 

shock, cause a fire or damage the AC adapter.

R WARNING! Connect the adapter into an outlet between 

100 V and 240 V AC. Otherwise, this may result in an electri-

cal shock, cause a fire or damage the AC adapter.

R WARNING! NEVER install the AC adapter to wet place  

outside or near a humidifier. This may result in an electrical 

shock, cause a fire or damage the AC adapter.

R WARNING! NEVER put something heavy on the AC 

adapter cable. This may result in an electrical shock,  cause 

a fire or damage the AC adapter.

R WARNING! NEVER modify, bend by force, twist, pull or 

heat the AC adapter’s cable. This may result in an electrical 

shock, cause a fire or damage the AC adapter.

R WARNING! NEVER touch the AC adapter with wet 

hands. This may result in an electrical shock or damage the 

AC adapter.

R WARNING! Use and place the AC adapter and connec-

tion cable to avoid inadvertent use by children. This may re-

sult in an electrical shock or 

cause injury.

■

 Other precautions

•  For information about operating the PC or external devices, 

refer to their instruction manuals for details.

•  The supplied AC adapter may at some time need to be re-

placed, depending on its life expectancy. The life of an AC 

adaptor differs according to the environment or condition in 

which the adaptor is used. 

   We recommend replacement when it has been used for ap-

proximately 5 years (When used under the ambient temper-

ature of 25°C; 77°F). Contact your local dealer for details.

FCC INFORMATION

CAUTION:  Any changes or modifications not expressly ap-

proved by the party  responsible for compliance 

could void the user’s authority to operate the 

equipment.

FOR CLASS B UNINTENTIONAL RADIATORS: 

This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to part 15 of 

the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in ac-

cordance with the instructions, may cause harmful interfer-

ence to radio communications. However, there is no guaran-

tee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

 • Reorient or relocate the receiving antenna.

 •  Increase the separation between the equipment and re-

ceiver.

 •  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

 •  Consult the dealer or an experienced radio/TV technician 

for help.

ABOUT CE

Versions of the IP1000C which display the “CE” 

symbol on the serial number label comply with the 

essential requirements of the 2014/30/EU directive 

for Electromagnetic Compatibility and the 2001/95/EC direc-

tive for General Product Safety.

DISPOSAL

The crossed-out wheeled-bin symbol on your 

product, literature, or packaging reminds you 

that in the European Union, all electrical and 

electronic products, batteries, and accumula-

tors (rechargeable batteries) must be taken to 

designated collection locations at the end of 

their working life. Do not dispose of these prod-

ucts as unsorted municipal waste. Dispose of them accord-

ing to the laws in your area

■

 For the IP1000C

R WARNING! NEVER use other than the supplied AC 

adapter. This may result in an electrical shock, cause a fire 

or damage the IP1000C.

R WARNING! NEVER attempt to connect the AC adapter 

to other than the [DC] jack on the IP1000C rear panel. This 

may result in an electrical shock, cause a fire or damage the 

IP1000C.

R WARNING! NEVER disassemble, modify or repair the 

IP1000C. This may result in an electrical shock, cause a fire 

or damage the IP1000C.

R WARNING! NEVER install the IP1000C in a wet place 

or outside. This may result in an electrical shock, cause a fire 

or damage the IP1000C.

R WARNING! NEVER operate or touch the IP1000C with 

wet hands. This may result in an electrical shock or damage 

the IP1000C.

R WARNING! NEVER connect the ground terminal to a 

gas or electric pipe. This may result in an electrical shock or 

cause a fire.

R WARNING! NEVER use the IP1000C during a lightning 

storm. It may result in an electric shock, cause a fire or 

damage the IP1000C. Always disconnect the AC adapter 

before a storm.

R WARNING! Immediately disconnect the AC adapter if 

the IP1000C emits an abnormal odor, sound or smoke. Con-

tact your Icom dealer or distributor for advice.

R WARNING! NEVER put the IP1000C in any unstable 

place (such as on a slanted surface or vibrating place). This 

may cause injury and/or damage to the IP1000C. 

CAUTION: NEVER install the IP1000C in a place without 

air vents. Heat dissipation may be reduced, and this could 

damage the IP1000C.

CAUTION: DO NOT use or place the IP1000C in areas with 

temperatures below 0ç (+32ƒ) or above +40ç (+104ƒ).

CAUTION: DO NOT place the IP1000C in direct sunlight. 

This could damage the IP1000C.

CAUTION: DO NOT use the IP1000C in strong magnetic 

fields or in an area with high static electricity. This could dam-

age the IP1000C.

CAUTION: Disconnect the AC adapter when you will not 

use the IP1000C for a long period of time.

CAUTION: DO NOT use harsh solvents such as Benzine 

or alcohol when cleaning, because they will damage the 

IP1000C’s surfaces.

Always place the IP1000C in a secure place to avoid inad-

vertent contact with unauthorized persons.

PRECAUTIONS

PRECAUTIONS

Thank you for purchasing this Icom product. The IP1000C 

ip

advanced

radio

system

controller

 is designed and built 

with Icom’s IP network technology.

We hope you agree 

with Icom’s philosophy of “technology first.” Many hours of 

research and development went into the design of your 

IP1000C.

IMPORTANT

READ ALL INSTRUCTIONS carefullyand completely 

before using the IP1000C.

SAVE THESE INSTRUCTIONS

 — 

These instructions 

contain important safety and operating instructions for the 

IP1000C.

EXPLICIT DEFINITIONS

WORD

DEFINITION

RWARNING!

Personal injury, fire hazard or electric 

shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk 

of personal injury, fire or electric shock.

IP ADVANCED RADIO SYSTEM 

CONTROLLER

IP1000C

Icom is not responsible for the destruction, damage to, or 

performance of any Icom or non-Icom equipment, if the 

malfunction is because of:

•  Force majeure, including, but not limited to, fires, 

earthquakes, storms, floods, lightning, other natural 

disasters, disturbances, riots, war, or radioactive 

contamination.

•  The use of Icom product with any equipment that is not 

manufactured or approved by Icom.