Icom Marine Commander MXF-5000 Instruction Manual - Installation and Connections
of
16
2
INSTALLATION AND CONNECTIONS
2
■
Jumper setting (When connecting an EX-3195 ONLY)
When connecting an EX-3195, move the jumper
(MAIN unit; J15) to the 1 kW position as follows.
CAUTION:
Before changing the jumper setting,
make sure disconnecting the fi sh fi nder’s DC power
cable from the battery.
q
Remove the 9 screws from the bottom cover and
remove it.
w
Move the jumper to the 1 kW position.
e
Return the bottom cover to the original position, and
then reinstall the 9 screws.
Remove the 9 screws
600 W jumper position
(Default)
1 kW jumper position
MAIN unit
J15
DO NOT
open the bottom cover of the fish finder
unless connecting an EX-3195.
For qualifi ed equipment installers ONLY