ICON Health & Fitness WLIVEX5702.2 User Manual - page 7
7
STEP 4
Take the Handlebar (8) and fix into place using Metal Spac-
er (9) and Knob (10). Make sure you slide the Handle Pulse
Cable (4) over the Computer Bracket. Tighten fully.
STEP 5
Attach the Sliding Set (13) onto the Seat Post (60) using
M10 Carriage Bolt (14), M10 Flat Washer (20) and Knob
(21). Attach the Seat (12) onto Seat Post (60), select a
comfortable position and tighten the Plain Nuts securely.
STEP 6
Position the Seat Post (60) into the Main Frame. Select a
suitable height setting and secure in place with the Seat
Support Adjuster Knob.
STEP 7
Remove the 4 pre-fitted Screws (2) from the backside of
the Computer (1). Plug the Upper Computer Cable into the
backside of the computer (1) and secure onto the Handle-
bar Post Bracket using the 4 previously removed Screws
(2). Attach the Handlebar Cover (3) at the handlebar with 4
Screws (6). Insert the plug of the hand pulse cable (4) to the
jack of the computer (1) backside.
Now, your machine is ready for use.
21
3R
6
1
3L
2
70
10
11
9
4
15
16
20
14
21
13
19