ICON Health & Fitness XR 10.9 GGBE0969.2 User Manual - page 8
of
16
8
4. Orient the Bottom Crossbar (10) so that the
warning decal is on top. Attach the Bottom
Crossbar to one of the Upright Bases (2) with
two M8 x 77mm Bolts (28), a Support Plate (13),
and two M8 Locknuts (22). Do not tighten the
Locknuts yet.
Attach the Bottom Crossbar (10) to the other
Upright Base (2) in the same way.
3. Attach an Upright Base (2) to one of the
Stabilizers (1) with the indicated two M8 x 68mm
Carriage Bolts (20) and two M8 Locknuts (22).
Note: Attach the Upright Base so that the
hexagonal holes are on the indicated side.
Do not tighten the Locknuts yet.
Attach the other Upright Base (not shown) to
the other Stabilizer (not shown) in the same
way.
22
22
20
1
3
2
Hexagonal
Holes
28
2
10
2
13
22
Decal
4