ICON I-stage Owner's Manual - Front Panel Layout
4
Front Panel Layout
Jog wheel
This jog wheel is used for making selections, fast search, scrolling
and co-control with buttons.
Tip: The jog wheel is very useful for fine/fast adjustments. Depending on the
selected mode the jog wheel can be used for different purposes.
DJ mode: Scrolling up/down the clips simultaneously with your
software.
Effector mode: Changing an effect parameter after you have selected
a corresponding effect button.
DAW mode: Adjust the volume or pan for different channel by pressing
the corresponding channel's “volume” or “pan” button.
Setting/Shift buttons
Press this button to set the number of rows of clips that you have
created with your software. Press the button and rotate the jog wheel
until the display shows the same number as your created clips row
amount.
(Note: For this setting, make sure you are in “DJ” mode. To activate the
DJ mode, press the “DJ” button among the mode selection buttons.)
Fader
This slider controls the cross fader in your software. Slide to control the
transition between A & B.
7
8
Side Panel Layout
1
USB port (B-Type)
Functions as a MIDI port to your notebook (or computer) and compatible
software. Also provides power to your iStage.
USB port
Use to daisy chain with the second unit of iStage or any i-series controllers
such as iControls.
1
2
2
6