ICON weider 8515 WESY87150 User Manual - page 13
IMPORTANT: The assembly is divided into four stages: 1) frame
assembly, 2) press and butterfly arm assembly, 3) cable and pulley
assembly, and 4) seat and backrest assembly. The hardware for each
stage is packaged separately. WAIT UNTIL YOU BEGIN EACH
ASSEMBLY STAGE TO OPEN THAT PARTS BAG.
This chart is provided to help you identify the small parts used in assembly. Important: Some parts
may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags,
check to see if it has been pre-assembled. The number in parenthesis below each part refers to the
key number of the part. The second number refers to the quantity needed for assembly.
REMOVE THIS PART IDENTIFICATION
CHART FROM THE MANUAL
WESY87150 R1297A
1" Round Inner Cap (49)Ð4
1" Round Cover Cap (70)Ð4
3/4" Round Inner Cap (34)Ð4
1/2" x 3/4" Spacer (61)Ð2
1 1/2" Square Inner Cap (32)Ð2
1 3/4" Square Inner Cap (44)Ð6
2" Square Inner Cap (27)Ð2
2" Square Outer Cap (51)Ð2
1" x 7/8" Plastic Bushing (75)Ð2
1" Square Inner Cap (65)Ð1
5/8" x 9/16" Spacer (73)Ð1
5/8" Round Cover Cap (85)Ð2
5/8" Spacer (86)Ð2