Interchange NF6515-34 Operator's Manual - 15 Ga. Angled Finish Nailer
15 Ga. Angled Finish Nailer
Drives 34˚ Finish Nails (1-1/4" to 2-1/2" / 32 to 65mm)
Model No. NF6515-34
Item No. 65420
9
Interchange Brands
Operator’s Manual
32.
DISCONNECT THE AIR SUPPLY AND EMPTY THE MAGAZINE WHEN THE
NAILER IS NOT IN USE. NEVER LEAVE A NAILER UNATTENDED WITH
THE HOSE ATTACHED.
Always disconnect the air supply from the nailer and empty the magazine when
operation has been completed or suspended, when unattended, moving to a
different work area, adjusting, disassembling, repairing the nailer, and clearing a
jammed fastener .
33.
DISCONNECT AIR HOSE FROM NAILER WHEN:
Doing maintenance and inspection
Loading fasteners
Attaching or removing the nose cap
Clearing a jam
It is not in use
Leaving work area
Moving it to another location
Handing it to another person
34.
MAINTAIN NAILER WITH CARE.
Keep the nailer clean and lubricated for better and safer performance .
35.
USE ONLY AUTHORIZED OR RECOMMENDED PARTS, ACCESSORIES OR
FASTENERS.
Unauthorized parts, accessories or fasteners may void your warranty and can
lead to tool malfunction and resulting injuries . Only authorized service personnel
should repair the nailer .
36.
NEVER MODIFY OR ALTER A NAILER.
Doing so may cause it to malfunction and personal injuries may result . The
warranty is no longer valid when a tool is modified or altered .
37.
BE CAREFUL WHEN CLEANING TOOL WITH A BLOW GUN.
Do not touch the trigger, point the air outlet at a person, touch the safety/push
lever or set it to pushed up status .
38.
STORE NAILER PROPERLY.
When not in use, the nailer should be stored in a dry place .
Keep out of reach of children and lock the storage area .
Employer’s Responsibilities
1.
Ensure that this manual is available to operators and personnel performing
maintenance .
2.
Ensure that nailers are used only when operators and others in work area are
wearing
EYE PROTECTION .
3.
Keep nailer in safe working order .
4.
Maintain nailer properly .
5.
Ensure that the nailers that require repair are not used before the repair is
completed .