Intergraph InterServe 9000 Manual
DHA031531, 09/99
InterServe 9000
Late-Breaking News
Hardware
Mouse
If your system was delivered with a three-button Primax mouse, you may see a message that says
“MouseWare has detected a new Wheel Mouse....” and asks if you want to configure the new
device. If this happens, select No. If you experience any other anomalies while using the Primax
mouse, reinstall the mouse driver found on the Windows NT software CD-ROM.
If your system was delivered with a Logitech wheel mouse, you can find information on using it by
right-clicking the mouse icon in the taskbar tray, or by going to Start/Settings/Control Panel/Mouse
and clicking Help in the toolbar. If the wheel on the mouse does not function, or if you experience
any other anomalies while using the wheel mouse, install the
LMOUSE
driver software from the
Intergraph System CD using InterSite Version Manager.
Mylex AcceleRAID 250 and Adaptec SCSI Controllers
If your system uses the Mylex AcceleRAID 250 RAID controller and an Adaptec 2940UW
controller, or other Adaptec controllers that include a BIOS, you may get an error message during
system startup that there is not enough free space for the Adaptec controller expansion ROM. If
this occurs, you should disable the expansion ROM for the RAID controller which is not connected
to the system boot device.
To disable the Adaptec Expansion ROM:
1.
Start the system, and when prompted to configure the Adaptec controller, press
CTRL
+
A
.
2.
Select “Configure/View Host Adapter Settings” and press
ENTER
.
3.
Select “Advanced Configuration Options” and press
ENTER
.
4.
Select “Host Adapter BIOS (Configuration Utility Reserves BIOS Space)” and press
ENTER
.
5.
Press
ESC
until prompted to save the changes.
6.
Save the changes and press
ESC
to exit from the BIOS. The system will restart.
To disable the Mylex Expansion ROM:
1.
Start the system, and when prompted to configure the Mylex controller, press
ALT
+
M
.
2.
At the first screen, select “BIOS Enabled” and press
ENTER
.
3.
Press any key to save the change and exit from the BIOS. The system will restart.