Intergraph Zx1 Manual

Manual is about: ViZual Workstation

Page of 4

Download

Bookmark us

D1AA0032B, 08/00

Late-Breaking News

Windows 2000

Localized Versions

On a system with Windows 2000 Korean, Japanese, or Simplified Chinese, the Windows 2000

interface will display in English after completing Setup. Windows 2000 will display in the proper

language after you restart the system for the first time.

BIOS Changes

To run Windows 2000 on your system, you may need to make some changes in BIOS Setup.

To enable USB function:

♦

Under Advance Chipset Setup, change USB Function to Enabled.

To enable ACPI before installing Windows 2000 for the Hibernate and Standby features:

♦

Under Advance Chipset Setup, change ACPI Control Register to Enabled.

♦

Under Power Management Setup, change ACPI Aware O/S to Yes.

♦

Under Plug and Play Setup, change Plug and Play Aware O/S to Yes.

See the System Board Manual for more information on running BIOS Setup.

Power Management

Using current versions of Hardware Monitor and ECC Memory Monitor software prevents the use

of Hibernate or Standby modes. Updated versions that allow the use of these modes will be posted

to the Support pages on the World Wide Web (http://www.intergraph.com/ics) when available.

You cannot use Hibernate or Standby modes on a system with the following video controllers:

♦

Intense3D Wildcat 4105, 4000, 3510, 3410, 3400

♦

RealiZm II VX113, VX113A

Device Manager

If your system has a SAF-TE card installed on the RAID disk drive cage, Device Manager displays

the card under ? Other Devices. Despite this designation, the card is working properly.

Page 1
D1aa0032b, 08/00 z x1 late-breaking news windows 2000 localized versions on a system with windows 2000 korean, japanese, or simplified chinese, the windows 2000 interface will display in english after completing setup. Windows 2000 will display in the proper language after you restart the system for...
Page 2
2 device manager may display an error (!) for the vga controller on the following video controllers. You may ignore this designation, as it does not affect their operation: ♦ intense3d wildcat 4105, 4000, 3510, 3410, 3400 ♦ realizm ii vx113, vx113a reinstalling wildcat graphics drivers if you reinst...
Page 3
3 when going through setup for the first time on a system running windows nt server, do the following when asked if you want setup to search for the network adapter: 1. Click select from list and then click have disk. 2. In the text box, replace a: with \winnt\pro100plus, and then click ok. On a sys...
Page 4
4 bios and system board information see the system guide or system setup document for instructions on running bios setup and for detailed information on bios configuration. The bios information in the system board manual does not apply to your system’s customized bios. See the system board manual fo...