Intermec 203-771 Series Instructions Manual - Connecting From Your Pc
10
To disconnect
• Scan this bar code:
Bluetooth Device Disconnect
\60\02\52\05\00\00\06\00\00\00\00\00\00\00\00\00
The scanner disconnects from your host PC, emits a series of
beeps from high to low, and the blue Intermec Ready-to-Work
indicator turns off.
To determine the Bluetooth COM port
1
Double-click the Bluetooth icon on the taskbar. The
Bluetooth Settings window appears.
2
Select your SF51 or SR61, and click the Detail button.
3
Note the COM port listed in the Port Name field.
Connecting From Your PC
1
Press the Scan button or pull the trigger on your scanner. The
scanner enters a discoverable state.
2
On your PC desktop, right-click the Bluetooth icon on the
taskbar and select Add New Connection. The Add New
Connection Wizard appears.
3
Select Custom Mode, and click Next. The wizard searches for
Bluetooth devices.
4
In the Bluetooth Device list, select your scanner, and click
Next. The wizard tries to connect to your scanner, and the
Bluetooth Manager - Bluetooth Security box appears.
5
In the Bluetooth Passkey (PIN) field, enter the default
Bluetooth PIN, which is 0000 and click OK.
6
In the Service Selection list, make sure that Serial Port is
selected, and click Next.
7
In the Assignment of COM Port Name box, deselect the Use
default COM port check box. A message box appears
recommending using the default setting.
8
Click OK.