P/n 0-360049-01 getting started guide scanplus 1800 hand-held scanner anleitung für einsteiger guide de démarrage guia de iniciação guía de iniciacíon guida introduttiva.
3 2 easyset laser / wand emulation ➊ system power off ➋ connect cable ➌ system power on ➍ laser / wand emulation laser emulation digital wand emulation analog wand emulation - intermec interface, white high laser or wand emulation cable cables introduction full setup configuración completa configura...
5 4 customize parameters (optional) (*) = default value ➏ qwerty swedish / finnish qwerty italian qwerty norwegian qwerty danish qwerty spanish postamble = enter (*) postamble = carriage return postamble = none postamble = tab inter-character delay = none (*) inter-character delay = 20 msec keyboard...
7 6 customize parameters (optional) (*) = default value ➏ 9600 baud (*) 19200 baud 7 data bits (*) 8 data bits even parity (*) odd parity no parity postamble = carriage return + line feed (*) postamble = carriage return postamble = none rs-232 c connect cables scanner power on system power off syste...
9 8 code 39 upc-a, upc-e, ean-8, ean-13 (upc-a -> ean-13) code 128 / ean 128 upc-a, upc-e, ean-8, ean-13 (upc-a -> upc-a) trigger activation reset important ! Do not read these codes if your scanplus does not have a trigger. If you read these codes with a non-trigger model your scanplus may stop wor...
11 10 easyset caution – use of controls or adjustments or performance of procedures other than those specified herein result in hazardous laser light. Vorsicht – bei einer anders als hier beschriebenen verwendung der bedienelemente oder veränderungen oder einer anderen ausführung der arbeitsabläufe ...
12 regulatory statements © 2003 intermec technologies corporation. 2.1 edition all rights reserved. Intermec hereby declares that the scanplus 1800 has been tested and found compliant with the below listed standards as required by the emc directive 89/336/eec as amended by 92/31/eec and by the low v...
