Intermec ScanPlus 1800 Quick Start Manual

Manual is about: Intermec ScanPlus 1800: Reference Guide

Summary of ScanPlus 1800

  • Page 1

    Quick start guide scanplus 1800 hand-held scanner.

  • Page 2

    Quick setup choose your connection: select symbologies for your scanner ............................ 8 pc keyboard wedge / usb cable ....................... 4 rs-22 c cable ......................................................... 6 other connections ................................................1...

  • Page 3

    4 keyboard wedge or usb (for pc) system power off (keyboard wedge only) system power on (keyboard wedge only) only do this if you are using a keyboard wedge or usb cable. Step 1 connect cables: pc wedge cable p/n -6407-10 din/mini-din adaptor cable usb cable p/n -6408-12 keyboard wedge cable usb cab...

  • Page 4

    6 7 rs-232 c system power off system power on connect cables standard rs-22 c cable p/n -6402-00 read this code (standard rs-232 c pc serial port compatible) 9600 baud, 7 data bits, even parity, 2 stop bits, postamble = carriage return + line feed step 1 only do this if you are using an rs-22 c cabl...

  • Page 5

    Code 9 upc-a, upc-e, ean-8, ean-1 (upc-a -> ean-1) code 128 / ean 128 upc-a, upc-e, ean-8, ean-1 (upc-a -> upc-a) 8 9 symbologies disable all symbologies select symbology use the bar codes on the back cover to test your setup pdf 417 (1800 pdf only) step 2 trigger activation default setup important ...

  • Page 6

    10 11 full setup with easyset system power off connect rs-232 c cable (p/n 3-364032-00) system power on start easyset software read this code easyset setup scanner power on this guide allows you to set up your scanplus 1800 for most terminal connections and symbologies. If necessary, use the easyset...

  • Page 7

    0 cm - cm (0" - 14") scanplus 1800 vt 6 cm - 60 cm (2.4" - 24") scanplus 1800 st 0 cm - 10 cm (0" - 4") scanplus 1800 sr scanplus 1800 pdf 12 1 reading distance typical average reading distances caution – use of controls or adjustments or performance of procedures other than those specified herein r...

  • Page 8

    14 1 regulatory statements intermec hereby declares that the scanplus 1800 has been tested and found compliant with the below listed standards as required by the emc directive 89/6/eec as amended by 92/1/eec and 9/68/eec and by the low voltage directive 7/2/eec as amended by 9/68/eec: en022 en0024 e...

  • Page 9: Test Barcodes

    P/n -60049-11 rev. B test barcodes.