J&M Corporation INTEGRATR V MI-2034 Installation And Operation Instructions - page 2
The IntegratrV (#MI-2034) has been developed to provide
motorcycle riders with the most advanced audio and
communications system available. The IntegratrV allows
owners to utilize privately purchased portable modular
electronic devices such as cell phones, two way radios,
portable music storage devices (MP3/IPOD), along with
navigation (GPS)/highway warning audio devices.
The IntegratrV manages all audio sources as well as
communications with a passenger and other individuals,
whether on motorcycles or other vehicles. There are many
choices available, so it is important to fully understand how to
manage these options to bring the highest level of enjoyment
to you and your passenger. Please read the enclosed manual
completely. The manual provides an overview of the audio
& communications system, a detailed explanation how each
interface operates, and provides an understanding of options
/ accessories available to maximize your enjoyment of the
system.
Overview
The audio management of the IntegratrV consists of inputs and
outputs from numerous standard and optional devices. To gain
the most benefit from the system, it is necessary to understand
what functions are available. As with all audio systems, these
devices operate on different levels, which determine what
priority each level has over the other. These levels go from
lowest priority (level 1) to highest priority (level 4).
Music can be received into the helmet headsets using the
sources listed below:
Level 1
- Auxiliary Audio Input (MP3 players/iPod/FGA-345’s)
Level 2
- Driver/passenger intercom, which mutes level 1 audio
when engaged.
Level 3
- FRS/GMRS radios (462 MHz two-way radios from
Kenwood, Motorola, etc.) will also mute Level 1 audio and mix
with Level 2 intercom when signal is received.
Level 4
- Cell Phone or Navigation (GPS), which mutes level
3 through 1 and also connects rider and passenger helmet
headsets to the cell phone.
Radar detector will momentarily interrupt all lower levels (for
Right helmet speaker only), to signal:
• Accessory Audio Warning Device (equipped with audio output
jack)
The IntegratrV also provides the connection plugs for the rider
/passenger headsets for all of the functions noted above. The
IntegratrV has been optimized to provide excellent music fidelity
for your listening enjoyment.
passenger's
helmet headset
(not included)
driver's
helmet headset
(not included)
intercom volume/vox
sensitivity control
ground to
frame
fuse
holder
inline
noise
filter
12 volt
switchable
optional
FRS/GMRS
connection cable
optional
cell phone
connection
cable
optional
audio warning device
connection cable
handlebar PTT/volume
up/down switch
aux audio
connection
cable
GPS
or
optional
GPS
connection cable