J&M Corporation JMDM-IPBT-GL18 Installation & Operation Instructions - page 3
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
3. Package Contents
A
1
1/4”
Black
Rubber Boot
Relay Box
B
Cross Member
Passengers
6-pin Red Plugs
14-pin
Connector
• Digital music player
• Microphone integration terminal
• SD card (pre-loaded with sample/test MP3 files)
• GL-1800 connection harness
• iPod connection cable
• Auxiliary extension cable
• SD card reader/writer
• Velcro strips for mounting
4. Installation Instructions
Integration component terminal Installation and connections
➢ Diagram A and B
1. Remove:
Left fairing pocket
Headlight/Preload adjustment panel
Left side cover
Seat
2. Locate the mark on the lower left edge of the tour pack and drill a 1 1/4” hole. Diagram A
3. Route the included cables through the hole and install the supplied rubber grommet on the cables and into the 1 1/4” hole.