J&M Corporation JMDM-IPBT-GL18 Installation & Operation Instructions - page 7
7. When you are finished loading the SD card or USB thumb-drive, unplug it from the computer, insert into the JMDM-GL18B and select
CD on the Honda audio system control panel.
The music will begin to play and is displayed as CD1. To change to the next folder press and hold the “Tune/Disc” up toggle for three
seconds and CD2 will begin to play. If you do not press and hold the “Tune/Disc” up/down toggle for the three seconds, the next track
will play in CD1 instead of the CD2 folder.
6. Bluetooth Linking/Pairing Scenarios
Note: CD must be selected on the Honda GL-1800 audio system for the following to function properly.
Pairing and Operation of the JMDM-IPBT-GL18 to a Bluetooth Enabled MP3 Player/iTouch
1. Turn the motorcycle ignition switch to on or accessory position.
2. Go into the settings menu of the MP3 player and select search for new Bluetooth device.
3. Once JM-MPBT-2 is displayed on your screen, click on it. When you are asked for a passkey, enter: 9088.
4. Once the MP3 player connects to the JMDM-IPBT-GL18 the music from the MP3 player will be heard through the Honda GL-1800
audio system and the music from the SD card will pause.
5. Volume adjustments can be made on the MP3 player itself. Set the music volume on the MP3 player to a maximum level before
distortion.
6. Once paired the Bluetooth enabled MP3 player will not need to be re-paired to the JMDM-IPBT-GL18 each time the ignition switch is
turned on.
Pairing and Operation of the JMDM-IPBT-GL18 to a Bluetooth Enabled Cell Phone
1. Turn the motorcycle ignition switch to on or accessory position.
2. Select the hands-free menu on the cell phone, go into the Bluetooth section and have the cell phone search for devices. When JM-
MPBT-2 is displayed on your screen, click on it. When you are asked for a passkey, enter: 9088. Your cell phone should now pair with
the JMDM-IPBT-GL18.
3. To set the cell phone volume, adjust the volume up or down buttons on the cell phone itself, during an actual conversation only.
4. During a cell phone conversation, both the driver and passenger can hear the call and also talk on the cell phone using their
helmet headsets.
5. For incoming cell phone calls you will first hear a Bluetooth alert tone followed by a verbal caller ID. To accept the incoming call
toggle the Tune/Disc button on the handlebar down. To reject the incoming call toggle the Tune/Disc button on the handlebar up.
6. Once paired the cell phone will not need to be re-paired to the JMDM-IPBT-GL18 each time the ignition switch is turned on.
Note: The intercom mute sensitivity level on the Gl-1800 audio system should be set to level 5 during cell phone conversation to
prevent the muting of the incoming cell phone audio level.
Pairing and Operation of the JMDM-IPBT-GL18 to a Bluetooth Enabled Smart Cell Phone
1. Turn the motorcycle ignition switch to on or accessory position.
2. Select the hands-free menu on the cell phone, go into the Bluetooth section and have the cell phone search for devices. When JM-
MPBT-2 is displayed on your screen, click on it. When you are asked for a passkey, enter: 9088. Your cell phone should now pair with
the JMDM-IPBT-GL18.
3. To set the cell phone volume, adjust the volume up or down buttons on the cell phone itself, but during actual conversation only.
4. During a cell phone conversation , both the driver and passenger can hear the call and also talk on the cell phone using their
helmet headsets.
5. For incoming calls you will first hear a Bluetooth alert tone followed by a verbal caller ID. To accept the incoming call toggle the
Tune/Disc button on the handlebar down. To reject the incoming call toggle the Tune/Disc button on the handlebar up.
6. The music player in the cell/smart phone can also be used to play music through the Gl-1800 audio system. Select your music play-
er in your smart phone and click on the play button. Adjust the music volume from the phone to a maximum level before distortion. The
Disc/Tune button on the handlebar can be used to track the music up and down on the smart phone.
7. The music from the smart phone will be interrupted during cell phone conversation and will resume play once the call has ended.