J&M Corporation STAGE-4 ROKKER XXR XXRK-630SP4-15RU-CVO Installation Instructions Manual - page 3
Rear Trunk-pod Speaker Installation
1. Remove both of the stock Harley rear trunk-pod speakers.
(Figure A)
2. Identify the ROKKER XXR speaker/grill assembly for the left side,
plug-in the wire spades and install complete assembly oriented
as per the diagram. (Figure A)
3. Identify the ROKKER XXR speaker/grill assembly for the right
side, plug-in the wire spades and install complete assembly
oriented opposite of the left side.
Important Note #1:
For both the left and right side rear trunk-pod
speakers, you want to install them so that the grill-mounted tweeter
is oriented to outer position.
Important Note #2:
Do not over tighten the attachment screws as
the Harley rubber well nut inserts will pull completely out of the rear
trunk-pod or lower-fairing housing assembly.
Fig. A