J&M ROKKER XXRP 630W Installation And Operation Instructions

Summary of ROKKER XXRP 630W

  • Page 1

    ? 2016 j&m corporation. All rights reserved. 4/16 rokker® xxrp 630w amplifier kit for 2015-2016 harley® roadglide with lower/rear speakers # jamp-630hr15-rcp installation and operation instructions.

  • Page 2

    Batt + red black master frame grounding stud fuse heavy gauge amplifier power/ ground wire harness negative battery cable fig. A product overview this new j&m rokker xxrp dsp controlled 4-channel 630 watt rms fairing/rear speaker amplifier kit has been designed specifically for use on the 2015-2016 ...

  • Page 3

    Speaker enclosure speaker enclosure remove 2-pin 12v plug connection to amp fig. B fig. C power/ground cable (red and black wires) facing towards the left side of the bike. 6. Connect the amplifier main wiring harness to the amp before securing to the mounting bracket. Center the amp into position, ...

  • Page 4

    Specifications rokker® xxrp 630 full range class d amplifier output power (rms) @ 1% thd 1000hz 14.4v cea 2006 stereo @ 4ohms 4 x 157.5 watts – 630w rms total stereo @ 2ohms 4 x 157.5 watts – 630w rms total frequency response -3db 1hz - 69khz capable s/nratio separation >90db >74db input sensitivity...

  • Page 5

    Warranty registration form please fill out this card completely and mail it immediately after purchase. Please be sure that your zip code and serial number (if applicable) are legible. This will help us to serve you better. (please print) name ________________________________________________________...