1. DL manuals
  2. J. Perkins
  3. Toy
  4. Twister 3D Storm
  5. User Manual

J. Perkins Twister 3D Storm User Manual

Manual is about: The Ultimate 3D Electric Helicopter

Summary of Twister 3D Storm

  • Page 1

    Twister 3d storm the ultimate 3d electric helicopter specifications main rotor diameter…………………………720mm tail rotor diameter…………………………..135mm length………………………………………..630mm weight (without receiver & battery).….. ....500g (17.5oz) contents 1……………………………...Assembled helicopter 1 pair…..Balanced carbon fib...

  • Page 2: Index

    Index introduction………………………………….. Assembly…………………………………….. 1. Unpack you twister 3d storm…… 2. Aligning the tail boom & fin……….. 3. Tighten tail blades…………………. 4. Attach undercarriage……………… 5. Attach main rotor blades………….. 6. Receiver installation……………….. 7. Esc installation……………………. Radio setup………...

  • Page 3

    Twister 3d storm introduction about the twister 3d storm the twister 3d storm is designed to fly aerobatic and 3d manoeuvres using the latest generation brushless motors and lithium polymer battery packs and without the need for upgrades. The twister 3d storm’s state of the art 120 degree ccpm contr...

  • Page 4

    Twister 3d storm assembly 1. Unpack your twister 3d storm • carefully remove the model and other items from the packaging. • inspect the model to check that nothing is damaged and that all components have been included. 2. Aligning the tail boom & fin • check that the tail gearbox is perpendicu- lar...

  • Page 5

    Twister 3d storm 3. Tighten tail blades • tighten the tail rotor blades so they do not fall under their own weight. See below: 4. Attach undercarriage • using the supplied screws, attach the un- dercarriage and tail boom support as shown. 5. Attach main rotor blades • fit the main rotor blades using...

  • Page 6

    Http://www.Jperkinsdistribution.Co.Uk http://www.Modelengines.Com.Au twister 3d storm 7. Esc installation • mount the esc (electronic speed control- ler) to the helicopter side frame with dou- ble sided tape. Connect the speed control- ler outputs to the corresponding coloured cables on the motor. S...

  • Page 7

    Http://www.Jperkinsdistribution.Co.Uk http://www.Modelengines.Com.Au twister 3d storm 12. Connect battery to charger. • connect the balance plug on the battery into the side of the charger. See below: • the ‘charge’ led should be solid red while the ‘cell’ led’s will be solid green or solid orange d...

  • Page 8

    Http://www.Jperkinsdistribution.Co.Uk http://www.Modelengines.Com.Au twister 3d storm 6602306 carbon tail pushrod 6602308 tail boom 6602310 flybar 6602312 tail servo mount 6602314 auto rotation sleeve 6602318 bearing 5x8x2.5mm 6602320 tail rotor blades 6602322 ball head screw 4x6.5mm (20) 6602324 ca...

  • Page 9

    Http://www.Jperkinsdistribution.Co.Uk http://www.Modelengines.Com.Au twister 3d storm 6600338 cyclone 440t brushless motor 6602354 tail pitch control arm 6602356 motor mount set 6602358 tail rotor grip set 6602360 tail rotor hub 6602362 bearing 2x5x2.5mm 6601550 bearing 2x6x3mm 6602366 landing skids...

  • Page 10

    Http://www.Jperkinsdistribution.Co.Uk http://www.Modelengines.Com.Au twister 3d storm 6602384 boom support set 6602386 flybar paddles 6602388 tail drive belt 6600447 carbon main rotor blades 6602392 main rotor spindle shaft (2) 6602394 flybar control set 6602396 front swash control arm 6602398 thrus...

  • Page 11

    Http://www.Jperkinsdistribution.Co.Uk http://www.Modelengines.Com.Au twister 3d storm 6602428 pinion gear 11t 7712115 7.5g digital servo 6600342 electronic speed controller 4460102 heading lock gyro 6600322 li-po balancing charger 6602422 pinion gear 9t 6602426 pinion gear 10t 6602424 main gear (no ...

  • Page 12

    Http://www.Jperkinsdistribution.Co.Uk http://www.Modelengines.Com.Au twister 3d storm exploded view twister 3d storm.

  • Page 13: Hitec Optic 6 Sport

    Channel assignments ch1. R/h servo ch2. Front servo ch3. Speed control ch4. Tail servo (via gyro) ch5. Gyro gain ch6. L/h servo end point adjustments ch1. 100% - 100% ch2. 100% - 100% ch3. 100% - 100% ch4. 100% - 100% ch5. 60% - 60% ch6. 100% - 100% servo reverse ch1. Normal ch2. Reverse ch3. Normal...

  • Page 14: Futaba 9Cap

    Channel assignments ch1. R/h servo ch2. Front servo ch3. Speed control ch4. Tail servo (via gyro) ch5. Gyro gain ch6. L/h servo end point adjustments ch1. 100% - 100% ch2. 100% - 100% ch3. 100% - 100% ch4. 100% - 100% ch5. 50% - 50% ch6. 100% - 100% servo reverse ch1. Reverse ch2. Normal ch3. Revers...

  • Page 15: Spektrum Dx-7 / Jr

    Channel assignments ch1/thro. Speed control ch2/aile. R/h servo ch3/elev. Front servo ch4/rudd. Tail servo (via gyro) ch5/gear. Gyro gain ch6/aux1. L/h servo end point adjustments ch1/thro. 100% - 100% ch2/aile. 100% - 100% ch3/elev. 100% - 100% ch4/rudd. 100% - 100% ch5/gear. 60% - 60% ch6/aux1. 10...