J&W JW-H67M-USB3 User Manual - page 18
- 1 -
JW-H67M-USB3 User's Manual
4.5 BIOS Setup — CMOS Setup Utility
4.5.1 CMOS Setup Utility
After powering up the system, the BIOS message appears on the screen,when the first time
or when CMOS setting wrong, there is following message appears on the screen , but if
the first BIOS be setuped(or loaded default values) and save, the key will be
pressed if you will enter BIOS setup menu.
If this message disappears before you respond, restart the system by pressing
keys, or by pressing the reset button on computer chassis. Only when these
two methods should be fail that you restart the system by powering it off and then back on.
Press
DEL
to Run SETUP
• In order to increase system stability and performance, our engineering staff is
constantly improving the BIOS menu. The BIOS setup screens and descriptions
illustrated in this manual are for your reference only, and may not completely
match with what you see on your screen.This chapter were based mainly on
the model, unless specif cally stated.
• Do not change the BIOS parameters unless you fully understand its function.
The menu bar on top of the screen has the following main items:
Main For changing the basic system configuration
Advanced
For changing the advanced system settings
Chipset For changing the system ports settings
Boot For changing the system boot configuration
Security For changing the system security setttings
Save & Exit For changing CMOS mode and loading default settings
OC Drive
For changing the overclocking settings
Aptio Setup Utility - Copyright (C) 2010 American Megatrends,Inc.
Main
Advanced Chipset
Boot
Security
Save & Exit OC Drive
BIOS Information
C h o o s e t h e s y s t e m
default language
BIOS Vendor
Core Version
Compliency
Project Version
Build Date and Time
Memory Information
Total Memory
American Megatrends
4.6.4.0
UEFI 2.0
SB00B 0.70
x64
11/27/2010 15:32:28
2048 MB (DDR3 1333)
System Language
System Date
System Time
Access Level
[English]
[Thu 12/02/2010]
[17:27:30]
Administrator
→ ←
: Select Scree
↑↓:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. (C)Copyright 2010 American Megatrends, Inc.